Installing / Removing Battery Pack
WARNING: Make certain the
To install battery pack: Insert battery pack into tool until an audible click is heard (figure 2). Make sure battery pack is fully seated and fully latched into position.
To remove battery pack: Depress the battery release button in the back of the battery pack and pull battery pack out of tool (figure 2).
operation
SWITCH
To turn the unit “ON”, slide the lock off button, shown in figure 3, backward and squeeze the trigger switch. 3
Once the unit is running, you may release the lock off button.
In order to keep the unit running you must continue to squeeze the trigger. To turn the unit “OFF”, release the trigger.
WARNING: Never attempt to lock a switch in the ON position.
2 |
TRIMMING INSTRUCTIONS
1.WORKING POSITION – Maintain proper footing and balance and do not overreach. Wear safety goggles, non- skid footwear when trimming. Hold the unit firmly in both hands and turn the unit ON. Always hold the trimmer, as shown in the illustrations in this manual, with one hand on the switch handle and one hand on the bail handle. (figure 4) Never hold the unit by the blade guard.
4 |
8