Black & Decker CK1500RK manual How to Use, Product may vary slightly from what is illustrated

Product may vary slightly from what is illustrated.

1. Spout

†2. Removable scale filter

Models CK1500, CK1500R and

CK1500RK (Part# CK1500-05)

3.	Cool-touch handle	
† 4.	Lid
	Model CK1500 (Part# CK1500-02)
	Models CK1500R and CK1500RK
	(Part# CK1500R-02)
5.	I/O (On/Off) switch
6.	Kettle
7.	Water window with MAX level
8.	Power indicator light
9.	Grounded (3-prong) plug	

10. Cord storage (under the base)

†11. 360° swivel power base Models CK1500, CK1500R and CK1500RK (Part# CK1500-14)

† Consumer replaceable/removables parts











MAX

1.7L



1.0L

MIN







How to Use

This unit is for household use only.

GETTING STARTED

1.Remove all packing material and any stickers from the product.

2.This product has no removable parts.

3.Wash all parts as instructed in Care and Cleaning section of this manual.

4.Select a level surface where this unit is to be used allowing enough space for steam to escape without damage to counters, cabinets and walls.

5.Fill kettle with 2 cups of cold tap water and 1 cup of vinegar. Bring to boil and discard.

6.Fill kettle to maximum fill line with cold tap water. Bring to boil and discard. Repeat. Kettle is now ready for use.

Note: The kettle will only operate when placed on the power base with the “On/ Off” (I/O) switch in the “On” (I) position. The kettle will automatically switch “Off” (O) once the water has boiled. Also, the kettle will automatically shut off if there is no water in the kettle.

FILLING THE KETTLE

1. Remove the kettle from the power base and remove the lid. Fill with desired amount of cold tap water (from 3 to 7 ½ cups) through the opening at the top or fill directly through the pour spout (B).

	MAX	Note: Do not:
	1.7L	•	operate the kettle without water.
	1.0L
	MIN	•	overfill the kettle; keep water level below the maximum
B			mark on the fill window.
		•	remove the lid while water is heating.

2.Replace the lid and place the kettle firmly on the 360° swivel power base (C).

MAX

1.7L

1.0L

MIN

C

A

3

		BOILING WATER
		1.	Plug in the base.
	MAX	2.	Press the “On/Off” (I/O) switch to “On” (I). The power
	1.7L
	1.0L		light comes on and the water begins to heat (D).
	MIN
		3.	When water boils the kettle will automatically shut off and
			the indicator light will go out. You can turn the appliance
			off at any time by pressing the “On/Off” (I/O) switch to
D			“Off” (O).
			4