•Tilt the saw forward and rest front of the foot plate on material to be cut.
•Using the retracting lever, retract lower blade guard to an upward position. Lower rear of foot plate until blade teeth almost touch cutting line.
•Release the blade guard (its contact with the work will keep it in position to open freely as you start the cut). Remove hand from guard lever and firmly grip secondary handle (3), as shown in figure 11. Position your body and arm to allow you to resist kickback if it occurs.
•Make sure blade is not in contact with cutting surface before starting saw.
•Start the motor and gradually lower the saw until its foot plate rests flat on the material to be cut. Advance saw along the cutting line until cut is completed as shown in figure 11.
•Release trigger and allow blade to stop completely before withdrawing the blade from
the material.
•When starting each new cut, repeat as above.
11 |
wrench storage (fig.12)
The spanner wrench (8) can be stored on the saw shoe as shown in figure 12.
Maintenance
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.
12
8
Lubrication
Black+Decker tools are properly lubricated at the factory and are ready for use.
Accessories
Rip fences and other accessories are available from Black+Decker Service Centers. To find your local service location, call:
www.blackanddecker.com Recommended accessories for use with your tool are available from your local retailer.
WARNING:The use of any accessory not recommended for use with this tool could be hazardous. Use only
Service Information
All Black+Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact
the Black+Decker location nearest you. To find your local service location, call:
Full Two-Year Home Use Warranty
Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The defective product will be replaced or repaired at no charge in either of two ways.
The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer
9
