How to use your Coffee / Tea Maker
Your coffee / tea maker is intended for making coffee for domestic indoor use only.
Before First Use :-
•The inside of the coffee/tea maker and thermal flask must be cleaned. Use warm sudsy water to wash the inside of jug. Rinse well and dry thoroughly.
•Wipe the unit with a soft cloth or sponge.
•Brew 10 cups of fresh water only. Follow the instructions under "brewing coffee / tea" but do not add coffee grounds / tea leaves to the filter.
•When all the water has brewed into the carafe, turn the appliance off.
•Wait for 10 minutes, discard the water from the carafe & repeat the process once more.
Brewing Coffee / Tea :-
1.Open the water tank lid and pour enough water into the water tank to make the required number of cups (maximum 12 cups). Close the water tank lid.
2.Swing the filter holder out to the open position.
3.Spoon coffee or tea into the permanent filter as required. One level table spoon of coffee/tea should be added for each cup required.
4.Close the filter holder, making sure it is pushed fully onto the appliance.
5.Making sure the jug lid in properly secured in place. Press down the button of the lid and place the thermal jug on the platform.
6.Plug the unit into the power outlet in your home. Make sure that your home voltage is same as the rated voltage of the appliance.
7.a. Manual mode:
Press the ON/OFF button. The lamp in the display panel will come on.
Open
b. Program mode:
Refer to the "Program Setting" section for details. The indicator lamp will light up to indicate that the brew cycle is working.
c. Once the brewing is complete, the unit will sound a "Beep" and the indicator light will go off.
d. Unplug the unit after use.
NOTE : Hot steam may escape from the gap between the jug and the filter holder.
