6. Close brew basket by pushing toward the unit until it 
clicks into place (E).
E
7. Place both thermal mugs in position with lids tightly 
closed. The ridges on the base indicate exactly where to position the mugs (F).
Important: To ensure that water brews right into the mug, make sure you place the mug inside the ridges.
F
8. Select the 2 MUGS setting (G).
G
b. If you fill up to the 2 MUGS (MAX) level with mug on the wrong side and mug selector on the wrong setting, it will cause water to over flow.
8.Close the water reservoir cover.
9.Place mug with lid tightly closed inside the base ridges (refer to fig. F). The ridges on the base indicate exactly where to position the mugs.
Important: You must position the mug inside the ridges to ensure coffee brews right into the mug and avoid an overflow.
10.If you want to brew only one mug, you must place mug on left side of unit.
THIS SIDE IS FOR JUST ONE MUG SERVING. If you place the mug on the wrong side, it will cause an overflow.
11.Select number of mugs to brew by moving the selector to 2 MUGS or 1 MUG setting (K).
12. Make sure unit is plugged into electrical outlet.
13. Press On/Off switch to On position. Indicator light illuminates red.
K
14. Once brewing cycle is finished, press On/Off switch to Off. If not, unit will shut off automatically.
Coffee is Ready to Go!
CAUTION: To remove thermal mug, always grasp it by the
H
BREWING COFFEE
1. Turn unit Off.
9.Plug unit into electric wall outlet and press On/Off switch to On position (H). Indicator light illuminates red.
10.When brewing cycle is finished, press On/Off switch to Off position. If not, unit will shut off automatically.
11.Discard water from mugs.
Care and Cleaning
This appliance contains no
CLEANING
1. | Be sure the unit is turned off, unplugged and is cool. |
2. | Grasp small handle on brew basket and swing open. |
3. | To remove brew basket, pull out pivoting hinge from brew |
2.Wait for unit to cool.
3.To open brew basket, grasp small handle and swing open (refer to fig. C).
4.Insert permanent filter into brew basket (refer to fig. D).
L
basket holder (L). |
5. Add desired amount of coffee depending on whether you are making one or two mugs of coffee. We recommend 4 tablespoons for every
J | 6. Close brew basket by pushing inward until it clicks in |
place (refer to fig. E). |
7.Open water reservoir cover and fill with water up to the appropriate marking depending on amount of coffee you are making.
Tip: Use less water for brewing if you will be adding milk or cream.
CAUTION:
a.If brewing one mug only:
•Make sure to fill with water up to the 1 MUG level ONLY.
•Place mug on the left side.
•Set MUG selector to 1 MUG.
4. To replace, insert pivoting hinge into brew basket holder (M).
5. | Remove permanent filter and discard coffee grounds. |
6. | Wash thermal mugs, mug lids, permanent filters and brew |
| baskets in the dishwasher (top rack) or by hand with warm |
M | soapy water. Rinse and dry all parts. |
7.Wipe the exterior of the unit with a soft damp cloth. Do not use abrasive cleaners or scouring pads.
8.Do not clean the water reservoir with a cloth as it can leave lint residue inside the reservoir.
9.Never immerse the unit in water.
5 | 6 |
