Product may vary slightly from what is illustrated.
1. | Food pusher |
2. | Food fingers |
3. | Food chute |
4. | Cover |
5. | Tab |
6. | Slice/shred disc |
7. | Chopping blade |
8. | Hi and Lo speed control |
9. | Off/Pulse control |
10. | Center post |
How to Use
This product is for household use only.
•Before first use, unpack the product and remove packing material. Handle sharp chopping blade and slice/shred disc carefully.
•Wash all parts except base.
Note: Do not attempt to chop ice in this food processor; it will damage container and dull chopping blade. This unit will not whip cream, beat egg whites to
a desirable volume, grind coffee beans or spices with a high oil content, or slice or shred
CONTROLS
HI or LO — When these buttons are pressed, unit runs continuously until OFF button is pressed.
OFF — Processor should always be left in OFF position when unit is not in use.
PULSE — PULSE position must be pressed and held for unit to operate. When released, unit will stop. Use PULSE for short processing tasks, such as chopping nuts, raw meats, or vegetables. This lets you check processed results and control the fineness.
Important: For your protection, this unit has an Interlock system. The processor won't operate unless container is properly locked onto base (see illustration on the base). The tab on cover must be correctly locked into the slot on base. Be sure cover is turned fully into slot toward LOCK/ 
until you hear it click into place. Do not attempt to operate unit without container and cover correctly locked in place. Be sure base is on a flat, dry, clean surface before you begin processing.
TO SLICE OR SHRED
1. Place container over center post in base with handle at left.
Turn container towards base until it drops down into place.
Snap container in towards base and be sure the locking tab locks into place (A).
A
11. Base |
13. Disc stem
B 
2.Place disc stem onto center post in container (B) and slip the continuous flow discharge disc onto the stem.
To process directly into included container, place the disc stem onto the center post in the container, then grasp the slice/shred disc by its hub with the (slice or shred) up and push it down onto the disc stem.
3. Place food cover onto container so that its tab is facing
down towards base. Twist food cover in toward base to LOCK/ 
until you hear it click into place.
4.Plug cord into an electrical outlet.
5.Fill food chute with food and position the pusher over food.
9 | 10 |
