905013144 wo depth 11/28/06 7:43 AM Page 7

Leaving the Battery Pack in the Charger

The charger and battery pack can be left connected with the red light glowing indefinitely. The charger will keep the battery pack fresh and fully charged.

NOTE: A battery pack will slowly lose its charge when kept out of the charger. If the battery pack has not been kept on maintenance charge, it may need to be recharged before use. A battery pack may also slowly lose its charge if left in a charger that is not plugged into an appropriate AC source.

Important Charging Notes

1.Longest life and best performance can be obtained if the battery pack is charged when the air temperature is between 65°F and 75°F (18°- 24°C). DO NOT charge the battery pack in an air temperature below +40°F(+4.5°C), or above +105°F (+40.5°C). This is important and will prevent serious damage to the battery pack.

2.The charger and battery pack may become warm to touch while charging. This is a normal condition, and does not indicate a problem.

3.If the battery pack does not charge properly — (1) Check power at receptacle by plugging in a lamp or other appliance. (2) Check to see if receptacle is connected to a light switch which turns power off when you turn out the lights. (3) Move charger and

battery pack to a location where the surrounding air temperature is approximately 65°F - 75°F (18°- 24°C). (4) If charging problems persist, take or send the tool, battery pack and charger to your local service center.

4.The battery pack should be recharged when it does not produce sufficient power on jobs which were easily done previously. DO NOT CONTINUE use under these conditions. Follow the charging procedures. You may also charge a partially used pack whenever you desire with no adverse affect on the battery pack.

5.Black & Decker battery packs that are labeled “NiMH” should only be used with chargers labeled “NiMH“ or “NiCd/NiMH.”

6.Under certain conditions, with the charger plugged into the power supply, the exposed charging contacts inside the charger can be shorted by foreign material. Foreign

materials of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug charger before attempting to clean.

7.Do not immerse charger in water or any other liquid.

SAVE THESE

INSTRUCTIONS FOR

FUTURE USE

Features

A.jam clearing latch

B.contact trip

C.no-mar pad

D.low nail indicator windows

E.magazine

F.pusher release (other side)

G.lock-off

H.trigger

I.LED Status Indicator

J.belt clip (FS1202BN only)

K.belt clip release button (FS1202BN only)

GA

B

C

D

I

H

J

E

K

F

NAIL SPECIFICATIONS - FS1202BN/FS1802BN 18G CORDLESS NAILER

Lengths

5/8'' - 2" (15 mm - 50 mm)

Diameters

18 gauge / calibre 18

7

Page 7
Image 7
Black & Decker FS1202BN, FS1802BN Features, Leaving the Battery Pack in the Charger, Important Charging Notes

FS1202BN, FS1802BN specifications

The Black & Decker FS1802BN and FS1202BN are two powerful and versatile tools designed to cater to the needs of both DIY enthusiasts and professionals. These products embody the quality and innovation that Black & Decker is known for, offering features that enhance efficiency and user-friendliness.

The FS1802BN is an 18V cordless drill with an impressive battery life and performance. It is engineered with a powerful motor that delivers ample torque for various applications, making it suitable for drilling through wood, metal, and plastic. The drill's variable speed settings allow users to adjust the speed according to the task at hand, providing greater control and precision. The ergonomic handle is designed for comfort during prolonged use, reducing fatigue and enhancing grip. Additionally, its compact design means it can easily fit into tight spaces, making it ideal for intricate projects.

On the other hand, the FS1202BN is a lightweight, user-friendly corded drill that packs a punch despite its smaller size. It features a powerful 120V motor that ensures consistent performance without the worry of battery life. The FS1202BN is equipped with a keyless chuck, allowing for quick and easy bit changes without the need for additional tools. This model also includes an integrated LED work light, illuminating dark work areas and making it easier to see what you're doing, an essential feature when working on detailed tasks.

Both drills share technologies that embody convenience and safety. They are equipped with built-in overload protection, which prevents the motor from overheating, extending the tool's life. Furthermore, the incorporated forward/reverse switch allows users to easily switch between drilling and un-drilling tasks, enhancing versatility.

In terms of design, both models feature a sleek, modern look with a durable build that can withstand the rigors of various work environments. The easy-to-reach controls ensure that users can operate the devices efficiently, enhancing their overall experience.

In conclusion, the Black & Decker FS1802BN and FS1202BN stand out in their categories by combining performance, versatility, and user-centric features. Whether for home improvement projects or professional tasks, these tools are designed to meet the demands of a wide range of applications, making them reliable choices for anyone looking to invest in high-quality drilling solutions.