Maintenance
Your Black & Decker appliance has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper appliance care and regular cleaning.
uKeep the unit clean and dry.
uDo not use any abrasive or
uRegularly clean the ventilation slots in your appliance using a soft brush or dry cloth.
Adjusting the cutter plate
The cutter plate needs to be adjusted if the appliance fails to shred material.
uTurn the adjustment knob (7) clockwise half a turn into the cutting position to cut through light material completely.
uTurn the adjustment knob
The materials may need to be put through the appliance twice to crush the material before cutting it completely.
uMake sure the cutting blade does not touch the anvil blade to avoid damage to the appliance.
When the shredded material starts to hang like a chain as shown in fig. D, adjust as follows:
uSwitch the appliance on.
uTurn very slowly and slightly the adjustment knob (7) clockwise until you hear a light grinding sound or a small amount of aluminium shavings will fall out of the discharge chute. The shredded material will now be separated as shown in fig. E.
Warning! Ensure the appliance is switched on and working in normal forward direction. Adjusting the cutter plate while the appliance is switched off can lead to serious damage of the appliance.
Overload protection (fig. C)
This appliance has an overload protection. If the appliance becomes blocked and the motor stalls, the power will automatically be switched off.
uWait for about 5 minutes for the protection to reset.
uDisconnect the appliance from the mains supply.
uClear the blockage as described above.
uConnect the appliance to the mains supply.
uPress the overload protection button (3).
uSwitch the appliance on.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
uSafely dispose of the old plug.
uConnect the brown lead to the live terminal in the new plug.
uConnect the blue lead to the neutral terminal.
uConnect the green/yellow lead to the earth terminal. Warning! Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 13 A.
Protecting the environment
Z Separate collection. This product must not be disposed of with normal household waste.
Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product zavailable for separate collection.
Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our
Technical data
|
| GS2400 Type 1 |
Voltage | V | |
Frequency | Hz | 50 |
Power input | W | 2,400 |
Motor duty class |
|
|
at 2,400 W |
| |
at 2,000 W |
| S1 |
46 | ||
Max cutting diameter | mm | 40 |
Weight | kg | 26.5 |
Notes
Motor duty class:
Max cutting diameter: 40 mm.
9
