Black & Decker GSR10 Troubleshooting, Care and Cleaning, Problem, Cause, Solution, Not Get Hot

Models: GSR10

1 17
Download 17 pages 1.45 Kb
Page 5
Image 5
Care and Cleaning

GSR10Pub1000002369 6/14/05 4:57 PM Page 8

4. Plug in the unit into an electrical outlet.

5. Press the On/Off (I/0) switch (S).

 

6. Remove the steam nozzle from its holder facing upward, away

S

from you and press the Steam button (T). The indicator lights

on the unit illuminate and in a few seconds steam is released.

 

Important:

 

• Never place your hand in front of steam nozzle where steam

 

is being released.

T

• Do not leave the steam nozzle in one area for a long period of

time because the garment will get wet.

7.Use the lint brush to remove lint from the fabric as it steams.

Automatic Shutoff

The unit shuts off automatically:

• After 30 minutes of inactivity

• If water tank is empty

To use the unit again, turn Off then On and resume operation.

Care and Cleaning

This product contains no user serviceable parts. Refer service to qualified service personnel.

Cleaning

1.Make sure the unit is off.

2.Wait for the unit to cool down completely before draining the water tank.

3.Remove water tank and drain any remaining water.

4.Wipe the outside surface with a damp cloth. Never immerse the unit in water or other liquids.

Storage

Make sure unit is off and unplugged.

Unit stores vertically for compact storage. If you need more height, you can adjust the extension tubes.

Insert the steam nozzle in its holder and wrap the cord around the cord wrap.

Important: If you want to leave your unit ready for daily use, just leave the water tank filled and in place.

TROUBLESHOOTING

 

 

PROBLEM

CAUSE

SOLUTION

 

 

 

 

 

 

 

 

 

 

Steamer Does

1. Steamer is not plugged

1. Plug power cord into

 

 

 

Not Get Hot

into electrical outlet.

electrical outlet.

 

 

 

 

2. Flexible hose is not

2. Check flexible hose

 

 

 

 

connected properly.

connection.

 

 

 

 

3. Unit shuts off

3. Turn off unit then

 

 

 

 

automatically.

on again.

 

 

 

 

 

 

 

 

 

 

No Steam

Water level is too low.

Refill the water tank

 

 

 

 

 

following instructions

 

 

 

 

 

on page 6

 

 

 

 

 

 

 

 

 

 

Water Drips

Condensation has formed

Hold the steamer hose

 

 

 

From The

inside the steamer hose.

upright fully extended and

 

 

 

Steam Nozzle

 

allow excess moisture to

 

 

 

 

 

drain back in the water

 

 

 

 

 

reservoir.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

8

Page 5
Image 5
Black & Decker GSR10 Troubleshooting, Care and Cleaning, Problem, Cause, Solution, Not Get Hot, No Steam, Water Drips