Hover Mower GX302
User manual
Congratulations!
On your purchase of your Black & Decker hover lawnmower.
This user manual provides important operating and maintenance instructions for all of the hover mowers in the Black & Decker GX302 range.
Know your mower
Read all of this manual carefully, observing all the recommended safety instructions before, during and after using your mower, and maintain your mower in good working order.
Familiarise yourself with the controls on your mower before attempting to operate it, but above all, be sure you know how to stop your mower in an emergency.
Retain this user manual and all other literature supplied with your mower for future reference.
Safety instructions
Training
•Never allow children or persons who are unfamiliar with this type of mower to use it, nor anyone who has not read this user manual.
|
| Do not allow children, animals or |
|
| other persons near your mower |
6m / 20ft | 360 | when in use - always keep them |
| at least 6m (20ft) away from the | |
|
|
cutting area.
•Remember that the operator is responsible for accidents or hazards occurring to other people or their property.
•Your mower is designed for use on AC (mains) electrical supplies only - do not attempt to use it on any other supply.
•Plug your mower into a power point - never a lighting socket.
•Never carry your mower by the cable or
!jerk the cable to seperate the connectors. Keep the cable away from heat sources, oils or sharp edges. Check the condition of your cable before use and do not use if damaged.
Preparation
•To protect your feet, always wear stout shoes or boots - freshly cut grass is damp and slippery.
•Rubber or
•Do not operate your mower barefoot or in open sandals.
• Use protective equipment. Wear safety spectacles or goggles whilst operating your mower. Use ear protection if the sound level seems uncomfortable when using your mower.
•Use a face mask if dusty.
•Wear long trousers to protect your legs - any debris left on the lawn or cutting path may be picked up and ejected by the blades.
•The power supply cable should be regularly inspected for signs of damage or ageing, and only used if in good condition.
•Always keep the power supply cable away from the blades - be aware of its position at all times.
•Always be sure your mower is in a safe operating condition.
• Before using your mower, disconnect it from the electrical supply and visually check that the blade, blade nut and cutter assembly are not worn or damaged. A damaged blade or worn blade nut is a major hazard and must be replaced. Also check that the blade nut is securely fastened.
•Always check that your lawn or cutting path is clear of all sticks, stones, wire and other debris. Contact with such debris may be dangerous or may damage your mower and could be thrown by the blade.
Operation
•When tilting the handle downwards (or to the side) to start your mower, do not tilt it more than is absolutely necessary.
Always ensure that both hands are in the operating position and feet are well away from the blades before returning your mower to the ground.
Your mower will continue to run for a short time after releasing the switch lever. Always allow your mower to stop on its own.
•Release the switch lever to turn your mower off and remove the plug from the mains:
2
