POLARIZATION PLUGS
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If is still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
ASSEMBLY
WARNING: Make sure that the appliance is switched off and unplugged.
ATTACHING THE ACCESSORIES FOR VACUUMING (FIG. B)
The accessories provided can be used in various combinations, depending on the task: a. General vacuuming / dusting
b. Vacuuming in confined spaces
c. Vacuuming upholstery or in corners
To attach, insert the appropriate accessory into the front of the appliance as shown.
ATTACHING THE ACCESSORIES FOR BLOWING / INFLATING (FIG. C)
WARNING: When using the appliance for blowing or inflating purposes, wear eye protection. Keep the air intake free from obstructions to prevent the motor from overheating. Do not point the air outlet at yourself, bystanders or animals.
Inflation: For inflation mode use the tapered adaptors supplied which best fits your application. Fit the inflation adapter onto the hose, aligning the tab on the adapter with the hole in the hose adapter. Push adaptor in direction of arrow until it “clicks”. To remove, lift the tab up and pull off the adapter. During inflation control the airflow and pressure by cov- ering the air bypass hole with your thumb as shown in Fig. C.
CAUTION: Do not permanently cover the air bypass hole.
CAUTION: NEVER EXCEED RECOMMENDED PRESSURE. The item being inflated may burst and cause injury. Soft inflatable material items will not have existing pressure rating. Be careful not to
To attach accessories:
•Turn the exhaust filter cover (12) counterclockwise to remove it from the appliance.
•Remove the filter (13) from the appliance.
•Insert accessories into the opening. Make sure that it fits snug against the rear of the appliance.
OPERATION
WARNING: Before connecting to the power supply, make sure that the appliance is switched off.
SWITCHING ON AND OFF
•To switch the tool on, set the on/off switch (3) to position I.
•To switch the tool off, set the on/off switch (3) to position O.
WARNING: Make sure the accessories are securely attached before switching on. Keep a firm grip on the appliance when switching on and during use.
MOTOR THERMAL SAFEGUARD
The motor of the appliance contains a thermal safeguard. This device automatically switches the appliance off in case of overheating. If this occurs, proceed as follows:
•Switch the appliance off and remove the plug from the wall socket.
•Allow the unit to cool. When the unit has cooled down, check and clean the filters.
•
CLEANING THE DUST BOWL AND FILTER (FIG. D)
WARNING: Make sure that the appliance is switched off and unplugged. When the dust bowl is full or the filters are clogged, empty the bowl and clean the filters. The filters are
•Press the dust bowl release button (2) and remove the dust bowl (1).
•Remove the filter (6) from the dust bowl
•Brush any loose dust off the filter.
•Remove any dust from the dust bowl.
•Wash the filter in warm, soapy water. The bowl and the filter holder can also be washed if necessary. Do not immerse the appliance in water.
•Make sure the dust bowl, filter holder and filter are completely dry.
•Refit the filter and the filter holder.
•Refit the dust bowl onto the appliance,making sure the dust bowl clicks into place.
TO CLEAN THE EXHAUST FILTER, PROCEED AS FOLLOWS
•Turn the exhaust filter cover (12) counterclockwise to remove it from the appliance.
•Remove the filter (13) from the appliance.
•Wash and dry the filter as described above.
•Refit the filter and replace the exhaust filter cover. Turn the cover clockwise to lock in position.
CAUTION: Never use the appliance without the filters. Optimum dust collection will only be achieved with clean filters and an empty dust bowl. If dust begins to fall
back out of the appliance after switching it off, this indicates that the dust bowl is full and must be emptied.
REPLACING THE FILTERS
The filters should be replaced every 6 to 9 months and whenever worn or damaged. Replacement filters are available from your Black & Decker dealer (cat. no. HVF90).
•Remove the old filters as described above.
•Fit the new filters as described above.
STORAGE
•Wrap the power supply cord around the appliance.
•Store the appliance and the attachments in a dry location out of the reach of children.
CLEANING/MAINTENANCE
WARNING: Before cleaning and maintenance, switch the appliance off and unplug it.
From time to time wipe the appliance with a damp cloth. Do not use any abrasive or
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.
Problem | TROUBLESHOOTING |
|
Possible Cause | Possible Solution | |
• Unit will not start. | • Cord not plugged in. | • Plug tool into a working |
|
| outlet. |
ACCESSORIES
Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call:
WARNING: The use of any accessory not recommended for use with this tool could be hazardous.
SERVICE INFORMATION
Black & Decker offers a full network of
Black & Decker location nearest you. To find your local service location, refer to the yellow page directory under
FULL
Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The defective product will be replaced or repaired at no charge in either of two ways.
The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges.
The second option is to take or send the product (prepaid) to a Black & Decker owned or authorized Service Center for repair or replacement at our option. Proof of purchase may be required. Black & Decker owned and authorized Service Centers are listed under
This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to state. Should you have any questions, contact the manager of your nearest Black & Decker Service Center. This product is not intended for commercial use.
Free warning label replacement: If your warning labels become illegible or are missing, call
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd. See
ASPIRATEUR-SOUFFLEUR-
GONFLEUR PORTATIF AVEC CORDON
D´ALIMENTATION
MODE D’EMPLOIN° de catalogue
HV9000E
MERCI D’AVOIR CHOISI BLACK & DECKER !VISITEZ WWW.BLACKANDDECKER.COM/NEWOWNER
POUR ENREGISTRER VOTRE NOUVEAU PRODUIT.AVANT DE RETOURNER CE PRODUIT POUR QUELQUE
RAISON QUE CE SOIT, COMPOSER LE
AVANT D’APPELER, AYEZ EN MAIN LE N° DE CATALOGUE ET LE CODE DE DATE. DANS LAPLUPART DES
CAS, UN REPRÉSENTANT DE BLACK & DECKER PEUT RÉSOUDRE LE PROBLÈME PAR
TÉLÉPHONE. SI VOUS AVEZ UNE SUGGESTION OU UN COMMENTAIRE,
IMPRESSIONS SONT CRUCIALES POUR BLACK & DECKER.
Pour l´achat d´un filtre de rechange (HVF90), composer le 1-888-678-7278.
CONSERVER CE MANUEL POUR UN USAGE ULTÉRIEUR.
IMPORTANTES MESURES DE SECURITELorsqu'on utilise des outils électriques, il faut toujours respecter certaines mesures de sécurité, notamment suivantes.
LIRE ET COMPRENDRE TOUTES LES DIRECTIVES AVANT D’UTILISER L’APPAREIL.
AVERTISSEMENT :risque de blesser les animaux domestiques. Ne pas utiliser directement sur les animaux.
AVERTISSEMENT : Se conformer aux mesures suivantes afin
• Circuit fuse is blown.
• Circuit breaker is tripped.
• Cord or switch is damaged.
• Replace circuit fuse. (If the product repeatedly causes the circuit fuse to blow, discontinue use immediately and have it serviced at a Black & Decker service center or authorized servicer.)
•Reset circuit breaker. (If the product repeatedly causes the circuit breaker to trip, discontinue use immediately and have it serviced at a Black & Decker service center or authorized servicer.)
•Have cord or switch replaced at Black & Decker Service Center or Authorized Servicer.
d’éviter les risques d’incendie, de secousses électriques ou de blessures.
• | Ne pas laisser l’appareil branché sans surveillance. Le débrancher lorsqu'on ne s’en sert |
| pas ou qu'on doit le réparer. |
• | Utiliser à l'intérieur seulement. Ne pas s'en servir sur des surfaces mouillées. |
• Ne pas utiliser ni ranger l’appareil à l’extérieur ou sur des surfaces mouillées. Afin de ne pas | |
| trébucher, ranger l’aspirateur après chaque utilisation. |
• | Surveiller avec vigilance lorsque des enfants se trouvent à proximité de tout appareil. Il ne |
| s'agit pas d'un jouet. |
• | Utiliser seulement aux fins décrites dans le présent guide. Utiliser seulement des |
| accessoires recommandés par le fabricant. |
• | Ne pas utiliser un appareil dont la fiche ou le cordon est abîmé, qui présente un problème |
| de fonctionnement, qui est laissé à l’extérieur, qui est tombé dans l’eau ou qui est |
| endommagé. Le rapporter au centre de service autorisé de la région |
• | Ne pas tirer sur le cordon, ni transporter l’appareil par le cordon. Ne pas se servir du cordon |
| comme d’une poignée. Ne pas refermer une porte sur le cordon ni tirer sur le cordon |
| lorsqu’il se trouve près d’une arête ou d’un coin tranchant. Ne pas faire passer l’appareil sur |
| le cordon. Éloigner le cordon des surfaces chauffées. |
• | Ne pas tirer sur le cordon pour débrancher l’appareil. Il faut plutôt saisir la fiche. |
• | Ne pas manipuler la fiche ni l’appareil lorsque les mains sont mouillées. |
For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK & DECKER help line at
• Ne rien insérer dans les orifices. Ne pas utiliser lorsque les orifices sont bloqués; s'assurer |
qu'il n'y a aucune accumulation de poussière, de charpie, de cheveux ou de tout autre corps |
qui pourrait réduire le débit d'air. |
