Black & Decker ICR500 manual How to Use, Product may vary slightly from what is illustrated

Product may vary slightly from what is illustrated.

	7	8
	6
	5
	4
		9
	3
2		10

1

12 11

13

14

How to Use

This appliance is intended for household use only.

GETTING STARTED

Remove any labels, stickers or tags attached to the body or soleplate of the iron. Note: Use ordinary tap water for ironing. Do not use water processed through a home softening system.

Important: For optimum performance, let the iron stand for 90 seconds before beginning to iron.

Tip: If unsure of a garment's fiber, test a small area (on an inside seam or hem) before ironing.

Filling Water Tank

1. Open the water-fill cover (A).

A

2.Tilt the iron and using a clean measuring cup, pour water into opening until the water reaches the MAX level mark on the water tank (B). Do not overfill.

3. Close the water-fill cover.

B

1.Spray nozzle

2.Water-fill cover

3.Fabric selection dial

4.Spray button

5.Steam button

6.Power and auto shutoff indicator light

7.Comfort Grip™ handle

8.Cord reel button

9.Sturdy anti-slip rubberized heel

10.Fabric guide

11.Water tank

12.AUTO CLEAN® button

13.Soleplate

14.Button groove

Symbols

Surge of steam

Spray

Anti-Drip System

4.Plug in the iron. The power indicator light illuminates and stays on during the ironing cycle (C).

	Note: If you need to add water while ironing, unplug the iron and
	follow above steps.
C	SPECIAL FEATURES
	Automatic Shutoff in 3 Positions
	• Your iron will automatically turn off after 30 seconds of inactivity if
	left on its soleplate or on its side. If left vertically on its heel rest, it
30 seconds	will turn off after 8 minutes (D).
	• The unit beeps five times and the auto shutoff indicator light blinks
8 minutes	to let you know the iron has shut off.
	• Once you pick up the iron, an internal motion-sensitive detector is
D
	activated and the iron starts heating again.

Note: Wait for iron to reheat completely before resuming operation.

Anti-Drip System

The anti-drip system prevents water spotting at low temperatures.

IRONING WITH STEAM

Smart Steam™ Technology

The Smart Steam™ system automatically generates the right amount of steam for the fabric type selected. Once you select the temperature, the Smart Steam™ technology detects the set temperature and adjusts the steam power accordingly.

3 4