Reccomendations when mincing
Ingredients | Max Run Time | Speed | Max Quantity |
| (Seconds) |
| (g) |
|
|
|
|
Meat * | 20 sec | 1 | 100g |
Cheese ** | 10 sec | 2 | 70g |
|
|
|
|
*Boneless meat in 3x3cm cubes
**Thawed hard cheeses like parmesan
Note: The mincer chopper should not be continuously run for longer than 50 seconds.
Note: 100g is the maximum suggested quantity for this mincer mill.
Useful advice
•Wash the fruit carefully before stoning.
•Use fresh fruit and vegetables, as they contain more juice. Pineapples, celery stalks, apples, cucumbers, carrots, spinach, melons, tomatoes, oranges and grapes are particularly suitable for processing in the juice extractor.
•You do not need to remove the peels or skins. You only need to peel fruit with thick skin: citrus fruit, pineapple (remove the centre stalk).
•Fruits that contain starch, such as bananas, papayas, avocados, figs, strawberries and mangoes are not suitable for processing in the juice extractor. Use a food processor, blender or stick blender to process these fruits.
ENGLISH
•The juicer is not suitable for processing very hard and/or fibrous/starchy fruits or vegetables such as sugar cane.
•Choose fresh, ripe fruit and vegetables, they will yield more juice.
•Drink the juice immediately after you have extracted it. If it is exposed to air for some time, the juice will lose its taste and nutritional value.
•To extract the maximum amount of juice, always press the pusher down slowly.
Note: Do not exceed the maximum capacity of 1.5 litres.
•When blending is complete return the control knob to the off (0) position.
Once the blade has come to a complete stop, lift the jug (C) from the motor base (H).
•Remove the lid (B) and pour the ingredients into a suitable container.
Note: Ingredients can be added by inserting them through the hole left when the filler cap (A) is removed.
Warning! Never operate the Blender without the lid (B) fitted.
Warning! Do not use any of the accessories with out the required seal
Maintenance & cleaning
•Switch the appliance off, remove the plug from the wall socket and wait until the rotary sieve has stopped rotating before cleaning, changing accessories or approaching parts that move during use.
7
