Black & Decker JC100 English, After use, Inspection and repairs, Electrical safety, Overview

English

After use

•Remove the plug from the socket and let the appliance cool down before leaving it unattended and before changing, cleaning or inspecting any parts of the appliance.

•When not in use, the appliance should be stored in a dry place. Children should not have access to stored appliances.

Inspection and repairs

•Before use, check the appliance for damaged or defective parts. Check for breakage of parts and any other conditions that may affect its operation.

•Do not use the appliance if any part is damaged or defective.

•Have any damaged or defective parts repaired or replaced by an authorised repair agent.

•Before use, check the power supply cord for signs of damage, ageing and wear.

•Do not use the appliance if the power supply cord or mains plug is damaged or defective.

•If the power supply cord or mains plug is damaged or defective it must be repaired by an authorised repair agent in order to avoid a hazard. Do not cut the power supply cord and do not attempt to repair it yourself.

•Never attempt to remove or replace any parts other than those specified in this manual.

Electrical safety

This product must be earthed. Always check that the power

supply corresponds to the voltage on the rating plate.

If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.

Extension cables & Class l product

A 3-core cable must be used as your appliance is earthed and of Class l construction.

Up to 30m (100 ft) can be used without loss of power.

To avoid the risk of electric shock, do not immerse the cord, plug or

appliance in water or other liquid.

Overview

This appliance includes some or all of the following features.

1On / Off switch

2Lid

3Spout

4Maximum fill mark

5Water level indicator

6Power on indicator

7Kettle base

8Handle

Before first use

•Remove all packaging from the appliance,

•Clean the appliance before first use.

•Fill the kettle with cold water to the maximum fill mark (4). Do not over fill as described below.

•Close the lid (2). Boil the water as described below.

•Discard the boiled water and repeat the procedure.

-5-