ENGLISH
•To switch the appliance off during boiling, push the On / Off switch (2) the off position
(O).
•If you do not want to use the boiled water immediately, the kettle may be left on the base. If you want to bring the water back to boil after a while, push the on / off switch (2) to on again.
Pouring boiling water
•Make sure the appliance is switched off.
•Take the kettle off the base.
•To avoid scalding, tilt the kettle slowly to pour the boiled water.
•After pouring, place the kettle back on the base and remove the plug from the socket.
Cleaning and maintenance
Before cleaning and maintenance, remove the plug from the socket and allow the appliance to cool.
Warning! Before cleaning and maintenance, switch the appliance off, remove the plug from the socket and allow the appliance to cool.
Warning! Do not immerse the appliance, the base, the cord set or the plug in water or any other liquid.
•Wipe the exterior with a damp cloth.
•Do not use scouring pads.
•The filter in the pouring spout (3) can be lifted out and cleaned with warm water.
•If necessary, use a mild detergent to remove spots.
•Do not use any abrasive or solvent based cleaner.
•Do not immerse the appliance in water or any other liquid.
Technical data
| JC120 |
Voltage | |
Supply | 50/60Hz |
Power consumption | |
Cable length | 0.94 metres |
Capacity | 1.0 litres |
|
|
Weight | 0.85 kg |
|
|
6