![](/images/new-backgrounds/1241129/24112915x1.webp)
uTighten the screws (8).
Variable speed control
The tool has a variable speed on/off switch (1). The operating speed depends on how far you press the switch.
uUse a high speed for wood, medium speed for aluminium and PVC and low speed for metals other than aluminium.
Switching on and off
uTo switch the tool on, press the on/off switch (1).
uTo switch the tool off, release the on/off switch (1).
uFor continuous operation, press the
uTo switch the tool off when in continuous operation, press and release the on/off switch (1).
Hints for optimum use
uHold the tool firmly with both hands while cutting.
uThe shoe should be held firmly against the material being cut. This will help prevent the saw from jumping, reduce vibration and minimise blade breakage.
uLet the blade run freely for a few seconds before starting the cut.
uApply only a gentle pressure to the tool while performing the cut.
Sawing laminates
When cutting laminates splintering may occur which can damage the presentation surface. The most common saw blades cut on the upward stroke, therefore if the shoe plate is sitting on the presentation surface either use a saw blade that cuts on the downward stroke or:
uUse a
uSaw from the back surface of the workpiece.
uClamp a piece of scrap wood or hardboard to both sides of the workpiece to minimise splintering, and saw through this sandwich.
Sawing metal
uBe aware that sawing metal takes much more time than sawing wood.
uUse a saw blade suitable for sawing metal.
uWhen cutting thin sheet metal, clamp a piece of scrap wood to the back surface of the workpiece and cut through this sandwich.
uSpread a film of oil along the intended line of cut.
Maintenance
Your Black & Decker tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper care and regular cleaning.
Warning! Before performing any maintenance or cleaning, make sure that the tool is switched off and unplugged and that the saw blade has stopped.
uRegularly clean the ventilation slots in your tool and charger using a soft brush or dry cloth.
uRegularly clean the motor housing using a damp cloth. Do not use any abrasive or
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
uSafely dispose of the old plug.
uConnect the brown lead to the live terminal in the new plug.
uConnect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal. Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 5 A.
Protecting the environment
Z Separate collection. This product must not be disposed of with normal household waste.
Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product zavailable for separate collection.
Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our
8