CAUTION: Do not attempt to unclog the tines by dropping or tapping the tool on the ground. This can damage the unit.
STORAGE
Remove and clean any debris from the outside of the cultivator and inside of shroud before storage. See MAINTENANCE section.
CAUTION: DO NOT HANG ON THE SWITCH TRIGGER Note: Do not store the tool on or adjacent to fertilizers or chemicals. Such storage can cause rapid corrosion.
PREVENTING CORROSION
WARNING: Wear proper gloves and eye protection when cleaning tool.
Fertilizers and other garden chemicals contain agents that greatly accelerate the corrosion of metals. If you use the tool in areas where fertilizers or chemicals have been used, the tool should be cleaned immediately afterwards.
Wipe all exposed parts with a damp cloth. You may lubricate only metal parts with a light petroleum based oil. When cleaning, DO NOT immerse tool in water or spray it with a hose.
ACCESSORIES
Replacement tines (RT400) for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call:
WARNING: The use of any accessory not recommended for use with this tool could be hazardous.
THE RBRC™ SEAL
The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the
been paid by.
RBRC™ in cooperationBlack & Deckerwithand other battery users, has established programsBlackin &theDeckUnitedr States to facilitate the collection of spent
an authorizedservice center or to your local retailer for recycling. YouBlackmay&alsoDeckercontact your local recycling center for information on where to drop off the spent battery. RBRC™ is a registered trademark of the Rechargeable Battery Recycling Corporation.
MAINTENANCE
The cutting blades are made from high quality,hardened steel and with normal usage, they will not require resharpening. However, if you accidentally hit a wire fence, stones, glass or other hard objects, you may put a nick in the blade. There is no need to remove this nick as long as it does not interfere with the movement of the blade. If it does interfere, remove the battery from the unit and use a fine toothed file or sharpening stone to remove the nick.
If you drop the trimmer, carefully inspect it for damage. If the blade is bent, housing cracked, or if you see any other condition that may affect the trimmerʼs operation contact your local Black & Decker Service Center for repairs before putting it back into use.
Fertilizers and other garden chemicals contain agents which greatly accelerate the corrosion of metals. Do not store the tool on or adjacent to fertilizers or chemicals.
With the battery removed, use only mild soap and a damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.
10
