6. Do not freeze or immerse charger in water or any other liquid. | |
WARNING: Shock hazard. Do not allow any liquid to get | |
inside charger. Never attempt to open the battery pack for any | |
reason. If the plastic housing of the battery pack breaks or cracks, | |
return to a service center for recycling. |
|
INSTALLING / REMOVING BATTERY PACK | |
WARNING: Make certain the | |
prevent switch actuation before removing or installing battery. | |
TO INSTALL BATTERY PACK: | B |
Insert battery pack into tool until an |
|
audible click is heard (figure B). |
|
TO REMOVE BATTERY PACK: |
|
Depress the battery release button |
|
in the back of the battery pack and |
|
ASSEMBLY
AUXILIARY HANDLE ASSEMBLY (FIG. C)
• Position handle on upper tube to desired height.
• Ensure locking block (8) is aligned with groove in tube.
• Assemble and tighten bolt (9).
C |
|
8 | 9 |
pull battery pack out of tool |
(figure B). |
POLE EXTENSION (FIG. D)
• Loosen collar (10).
• Extend poles to desired length.
• Tighten collar.
D |
10 |
8