90547733 LPS7000 Saw 6/11/09 7:21 AM Page 6

a.An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety, and to prevent loss of power and overheating. The smaller the gauge number of the wire, the greater the capacity of the cable; that is, 16 gauge has more capacity than 18 gauge. When using more than one extension to make up the total length, be sure each extension contains at least the minimum wire size.

CHART FOR MINIMUM WIRE SIZE (AWG)OF EXTENSION CORDS

NAMEPLATE RATING AMPS – 0 – 10.0

Total Extension Cord Length (ft) 0-25 26-50 51-100 101-150 (0-7,6m) (7,6-15,2m) (15,2-30,4m) (30,4-45,7m)

Wire Gauge

18

16

16

14

8.Use only the supplied charger when charging your tool. The use of any other charger could damage the tool or create a hazardous condition.

9.Use only one charger when charging.

10.Do not attempt to open the charger. There are no customer serviceable parts inside. Return to any authorized Black & Decker service center.

11.DO NOT incinerate the tool or batteries even if they are severely damaged or completely worn out. The batteries can explode in a fire. Toxic fumes and materials are created when lithium ion battery packs are burned.

12.Do not charge or use battery in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Inserting or removing the battery from the charger may ignite the dust or fumes.

13.If battery contents come into contact with the skin, immediately wash area with mild soap and water. If battery liquid gets into the eye, rinse water over the open eye for three minutes or until irritation ceases. If medical attention is needed, the battery electrolyte is composed of a mixture of liquid organic carbonates and lithium salts.

WARNING: Burn hazard. Battery liquid may be flammable if exposed to spark or flame.

CHARGING PROCEDURE - FIGURE B & B1

B

 

IMPORTANT: The batteries in your tool are not fully charged at the factory. Before attempting to charge them, thoroughly read all of the safety instructions.

(1) The charging socket (3) is keyed to lock out other chargers. Align the tab in the charger plug (8) with the key in the charging socket (see figure B).

(2) Plug the charger output plug (8) into the charging socket (3) of the tool as shown in figure B1.

(3) Plug the charger (7) into any standard 120 Volt 60 Hz electrical outlet.

(4) Let the tool charge initially for at least 10 hours.

 

After the initial charge, your tool should be fully

3

charged in 10 hours from a fully discharged condition.

 

Recharge discharged batteries as soon as

B1

possible after use or battery life may be greatly

diminished. For longest battery life, do not

 

discharge batteries fully. It is recommended that the

 

batteries be recharged after each use.

 

WARNING: Do not use tool while it is connected to

 

the charger.

3

WARNING: Fire Hazard. When disconnecting the

charger from the tool, be sure to unplug the charger

 

from the outlet first, then disconnect the charger cord

 

from the tool.

 

Important Charging Notes

 

1. Your tool was sent from the factory in an

8

uncharged condition. Before attempting to use it, it

must be charged for at least 10 hours.

2.CAUTION: To reduce the risk of damage to the batteries, NEVER charge them in an air temperature below 40°F (4.5°C) or above 105°F (40.5°C). Also, NEVER charge them if the battery temperature is below 40°F (4.5°C) or above 105°F (40.5°C).

Longest life and best performance occurs when batteries are charged with an air

6

Page 5 Page 7
Page 6
Image 6
Black & Decker LPS7000, 90547733 manual Important Charging Notes, Nameplate Rating Amps 0, Charging Procedure Figure B & B1
Page 5 Page 7

90547733, LPS7000 specifications

The Black & Decker LPS7000,90547733 is a versatile lithium-ion powered lawn mower designed to meet the needs of homeowners looking for a reliable and efficient way to maintain their lawns. This model stands out for its combination of performance, ease of use, and advanced technology, making it an excellent choice for both seasoned gardeners and casual lawn keepers.

One of the main features of the LPS7000 is its powerful 40V lithium-ion battery, which provides ample runtime to take care of medium-sized yards on a single charge. This battery technology not only ensures fade-free power but also enables quick charging, allowing users to get back to mowing with minimal downtime. The mower's exceptional cutting capability is complemented by a durable 20-inch cutting deck, which provides a wide mowing path, resulting in fewer passes needed to achieve that pristine lawn finish.

The LPS7000 also incorporates an innovative IntelliCut technology, which adjusts power automatically based on the thickness of the grass. This ensures that the mower delivers optimal performance in various conditions without wasting battery life or compromising cutting quality. Users can seamlessly transition from mulching to bagging grass clippings. Its efficient grass collection system helps keep the cutting area clear and messy clippings to a minimum.

The ergonomic design of the mower includes a comfortable handle that can be adjusted to multiple heights, ensuring ease of use for a variety of operators. Additionally, the lightweight construction of the mower makes it easy to maneuver around obstacles in the yard, ensuring a precise cut without straining the user.

Another notable characteristic of the Black & Decker LPS7000 is its eco-friendly approach. Being battery-operated means no emissions or noise pollution associated with traditional gas-powered mowers. This feature makes lawn mowing a more enjoyable experience while being kinder to the environment.

In summary, the Black & Decker LPS7000,90547733 is a robust lawn mower that combines advanced technology, user-friendly features, and eco-conscious operation. With its powerful battery, versatile cutting systems, and ergonomic design, it represents an excellent solution for homeowners seeking an efficient way to maintain their lawns while enjoying the benefits of modern technology.
Top Page Image Contents