WARNING: Shock hazard. Do not allow any liquid to get inside charger. Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks or cracks, return to a service center for recycling.
Installing / Removing Battery Pack
To install battery pack:
Insert battery pack into tool until an B audible click is heard (figure B).
Make sure battery pack is fully seated and fully latched into position.
To remove battery pack: Depress the battery release button in the back of the battery pack and pull battery pack out of tool assembly
NOTE: Ensure the sweeper is switched off and the battery is
removed before attaching or removing the sweeper tubes. The inner tube must be assembled to the housing before use.
• tube assembly: To attach the inner tube to the sweeper, line up the tube with the sweeper housing as shown in figure C. Push the tube into the sweeper housing until the lock button engages the lock hole in the tube. Repeat this process for the outer tube.
C |
operation
CAUTION: Always wear | D |
safety glasses. Wear a filter mask if the |
|
operation is dusty. Use of gloves, long |
|
pants and substantial footwear is |
|
recommended. Keep long hair and loose |
|
clothing away from openings and moving |
|
parts. THIS SWEEPER IS FOR |
|
HOUSEHOLD USE ONLY. |
|
• Hold the sweeper with one hand as |
|
shown in figure D and sweep from side |
|
to side with the nozzle several inches |
|
above the ground. Slowly advance |
|
keeping the accumulated pile of debris |
|
in front of you. |
|
Switching on and off (Figure E) |
|
WARNING: Use both |
|
hands to grip the product firmly | E |
when switching on. |
To switch the sweeper on, slide the on/off switch forward .
To switch the sweeper off, slide the on/off switch back.
CAUTION: Do not point unit discharge at self or bystanders.
7
