Black & Decker MGD250 owner manual Blender Jar Assembly, How To Use

BLENDER JAR ASSEMBLY

1.Before first use, wash all parts except the Unit Base. To reassemble, put the Gasket on

top of the Blade Assembly, place the Blade Assembly into the Jar Base, and turn the Jar Base clockwise until tight. (A)

2. Place the Jar onto the Unit Base and twist slightly in either direction to be sure the Jar is properly “seated.”

HOW TO USE A

1. Be sure the unit is “off” (O) and plug the cord into a standard electrical outlet.

2. Place the food to be blended into the Jar.

3.Put the Lid on the Jar before beginning. Be sure that the Cap is in

position by placing the

tabs in the Cap into the notches into the Lid

and twisting close. When crushing ice or hard foods, keep one hand on the Lid.

B

4. Select the desired speed setting:

• Use settings 1-2 for stirring, chopping, and mixing; setting 3-4 for grinding, beating, and creaming; setting 5 for heavy-duty blending such as liquefying.

• For quick blending tasks, turn the Control Knob to the Pulse (P) position for a few seconds, then release. Use the Pulse for best

results when crushing ice.

5. If you want to add ingredients while the Blender is on, remove the Cap by

twisting it and lifting it out. Place ingredients through the Lid opening. (B)

6.When finished blending, turn to the “off” (O) position.

7.To remove the Jar, lift it from the Unit Base. Remove the Lid before pouring.

4