MOUSE® DETAIL SANDER POLISHER
INSTRUCTION MANUAL
Catalog Number MS800
Thank you for choosing Black & Decker! Go to www.BlackandDecker.com/NewOwner to register your new product.
PLEASE READ BEFORE RETURNING THIS
PRODUCT FOR ANY REASON:
If you have a question or experience a problem with your Black & Decker purchase, go to
HTTP://WWW.BLACKANDDECKER.COM/INSTANTANSWERS
for instant answers 24 hours a day.
If you can’t find the answer or do not have access to the internet,
call
Please have the catalog number available when you call.
KEY INFORMATION YOU SHOULD KNOW:
•Do not push
•Extended drywall sanding is not recommended for this product.
SAVE THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE.
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
Catalog Number MS800 | FORM NO. 90532198 REV. 1 | SEPT. ‘08 |
Copyright © 2008 Black & Decker | Printed in China | |
General Power Tool Safety Warnings
WARNING! Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
c)Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e)Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f)Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g)Use the power tool, accessories and tool bits etc., in accordance with these instructions, taking into account the working conditions and the work to be per- formed. Use of the power tool for operations different from those intended could result in a hazardous situation.
5)Battery tool use and care
a)Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
b)Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
c)When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
d)Under abusive conditions, liquid may be ejected from the battery, avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
6)Service
a)Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
SPECIFIC SAFETY RULES
•Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
WARNING: ALWAYS use safety glasses. Everyday eye glasses are NOT safety glasses. Also use face or dust mask if operation is dusty. ALWAYS WEAR CERTI-
FIED SAFETY EQUIPMENT:
•ANSI Z87.1 eye protection (CAN/CSA Z94.3)
•ANSI S12.6 (S3.19) hearing protection
•NIOSH/OSHA/MSHA respiratory protection
•Sanding of
•Clean your tool out periodically.
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.
The term “power tool” in the warnings refers to your
1) Work area safety |
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents. |
b) Do not operate power tools in explosive atmospheres, such as in the presence of |
flammable liquids, gases or dust. Power tools create sparks which may ignite the |
dust or fumes. |
c) Keep children and bystanders away while operating a power tool. Distractions can |
cause you to lose control. |
2) Electrical safety |
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not |
use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and |
matching outlets will reduce risk of electric shock |
b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, |
ranges and refrigerators. There is an increased risk of electric shock if your body is |
earthed or grounded. |
c) Do not expose power tools to rain or wet conditions. Water entering a power tool |
will increase the risk of electric shock. |
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the |
power tool. Keep cord away from heat, oil, sharp edges or moving parts. |
Damaged or entangled cords increase the risk of electric shock. |
e) When operating a power tool outdoors, use an extension cord suitable for |
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. |
f) If operating a power tool in a damp location is unavoidable, use a residual current |
device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. |
3) Personal safety |
a) Stay alert, watch what you are doing and use common sense when operating a |
power tool. Do not use a power tool while you are tired or under the influence of |
drugs, alcohol or medication. A moment of inattention while operating power tools |
may result in serious personal injury. |
b) Use personal protective equipment. Always wear eye protection. Protective |
equipment such as dust mask, |
used for appropriate conditions will reduce personal injuries. |
c) Prevent unintentional starting. Ensure the switch is in the |
connecting to power source and/or battery pack, picking up or carrying the tool. |
Carrying power tools with your finger on the switch or energizing power tools that have |
Functional Description
A. Switch “ON”
B. Switch “OFF”
C. Dust Canister
D. Removable Pad Tip
E. Hook and Loop Sanding
Pad
1On Off Switch
Interrupteur
Interruptor de Encendido
Y Apagado
B
A
C
D
E
2Extra Tips
Pointes supplémentaires
Puntas adicionales
the switch on invites accidents. |
d) Remove any adjusting key or wrench before turning the power tool on. A wrench |
or a key left attached to a rotating part of the power tool may result in personal injury. |
e) Do not overreach. Keep proper footing and balance at all times. This enables bet- |
ter control of the power tool in unexpected situations. |
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing |
and gloves away from moving parts. Loose clothes, jewellery or long hair can be |
caught in moving parts. |
g) If devices are provided for the connection of dust extraction and collection |
facilities, ensure these are connected and properly used. Use of dust collection can |
reduce |
4) Power tool use and care |
a) Do not force the power tool. Use the correct power tool for your application. The |
correct power tool will do the job better and safer at the rate for which it was designed. |
b) Do not use the power tool if the switch does not turn it on and off. Any power tool |
that cannot be controlled with the switch is dangerous and must be repaired. |
3 | Rotate 180° |
| Hook and Loop | 4 |
| ||||
| Faire Tourner sur 180° | Pad |
| |
| Gire180° | Tampon |
| |
|
|
| Almohadilla |
|
Pad Tip 
Pointe de tampon
Punta de la almohadilla
Sandpaper
Papier abrasif
Papel de lija
