Black & Decker VA050025D Protecting the environment, Replacing the filters, Battery Fig. G

ENGLISH

Warning! Never use the appliance without the filters. Optimum dust collection will only be achieved with clean filters and an empty dust bowl.

Replacing the filters

The filters should be replaced every 6 to 9 months and whenever worn or damaged. Replacement filters are available from your Black & Decker dealer (cat. no. VF60).

◆Remove the old filters as described above.

◆Fit the new filters as described above.

Protecting the environment

Separate collection. This product must not be disposed of with normal household waste.

Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection.

Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.

Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.

Battery (Fig. G)

If you want to dispose of the product yourself, the battery must be removed as described below and disposed of in accordance with local regulations.

Warning! Disconnect the appliance from the power supply before removing the battery.

◆Discharge the battery by operating the appliance until the motor stops.

◆Take the accessories from the appliance.

◆Remove the screws (6).

◆Open the appliance.

◆Remove the battery and the attached motor and switch module (7).

◆Use a screwdriver to detach the battery from the motor and switch module.

◆Place the battery in suitable packaging to ensure that the terminals cannot be short-circuited.

◆Take the battery to your service agent or a local recycling station.

Warning! Once removed, the battery cannot be refitted.

Service

Black & Decker offers a full network of company-owned and authorized service locations. All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service.

Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you.

Technical data

NV3600

Voltage	V	3.6
Battery type	NiCd/NiMH
Weight	kg	0.9

NiCd/NiMH	Charger	Model No.	Input		Output
	Voltage AR	AA045020D	220V	~ 50Hz 45mA	4.5V ~ 200mA
	Voltage B2C	VA050025D	220V	~ 50Hz 45mA	5V ~ 250mA
	Voltage B3	UA050020a	120V	~ 60Hz 5W	5V ~ 200mA
	Voltage BR	90501843	127V/220V ~ 60Hz 4W		4.5V ~ 130mA

14