To install battery pack: Insert battery pack into tool, until an audible click is heard as shown in figure B.
B
To remove battery pack: Depress the battery release buttons as shown in figure C and pull battery pack out of tool.
C |
Save these instructions for future use
OPERATING instructions |
|
WARNING: Always wear proper eye, respiratory and hearing protection while | |
operating this tool. |
|
• Use clamps or another practical way | D |
to secure and support the workpiece | |
to a stable platform. Holding the work |
|
by hand or against your body leaves it |
|
unstable and may lead to loss of control. |
|
• Place shoe firmly against work to be cut. |
|
• Hold the tool with one hand as shown in |
|
figure D. Switch on saw motor and allow it |
|
to obtain maximum speed before applying |
|
pressure. |
|
trigger Switch (Figure E) |
|
The tool is equipped with a switch | E |
feature to prevent unintentional operation. | |
• To switch the tool on, press the lock off | |
button (4) as shown in figure E, then | 4 |
squeeze the on/off switch (3). | |
• Once the tool is on, release the lock off |
|
button. | 3 |
• Releasing the trigger turns the motor OFF. | |
NOTE: This tool has no provision to lock |
|
the switch in the ON position, and should never be locked in the ON position by any | |
other means. |
|
9