Black & Decker PX1200 manual After use, Inspection and repairs, Electrical safety, Features

Models: PX1200

1 13
Download 13 pages 35.82 Kb
Page 4
Image 4

English

After use

Switch off and remove the plug from the socket before leaving the appliance unattended and before changing, cleaning or inspecting any parts of the appliance.

When not in use, the appliance should be stored in a dry place. Children should not have access to stored appliances.

Inspection and repairs

Before use, check the appliance for damaged or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.

Do not use the appliance if any part is damaged or defective.

Have any damaged or defective parts repaired or replaced by an authorised repair agent.

Before use, check the power supply cord for signs of damage, ageing and wear.

Do not use the appliance if the power supply cord or mains plug is damaged or defective.

If the power supply cord or mains plug is damaged or defective it must be repaired by an authorised repair agent in order to avoid a hazard. Do not cut the power supply cord and do not attempt to repair it yourself.

Never attempt to remove or replace any parts other than those specified in this manual.

Warning symbols

The following symbols are used on the product or in the manual.

Do not use this appliance near bathtubs, showers, basins or other vessels containing water.

When the hairdryer is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the hair dryer is switched off.

Denotes risk of personal injury or damage to the product in case of nonobservance of the instructions in this manual.

Denotes risk of electric shock.

Electrical safety

This tool is double insulated in accordance with EN 60335;

therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate.

To avoid the risk of electric shock, do not immerse the cord, plug or

motor unit in water or other liquid.

For additional protection, the installation of a Residual Current Device (RCD) having a rated residual operating current not exceeding 30mA is advisable in the electrical circuit supplying the bathroom.

Ask your installer for advice.

Features

1 On / Off switch

2 Voltage selector

3 Hanging loop

4 Concentrator nozzle

-4-

Page 4
Image 4
Black & Decker PX1200 manual After use, Inspection and repairs, Electrical safety, Features