633145-02,01 QP1020LK 12/16/05 1:20 PM Page 2

GENERAL SAFETY RULES

WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

WORK AREA

•Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

•Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

•Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

•Double insulated tools are equipped with a polarized plug (one blade is wider than the other.) This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized

outlet. Do not change the plug in any way. Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system.

•Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded.

•Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

•Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

•When operating a power tool

outside, use an outdoor extension cord marked “W-A” or “W.” These cords are rated for outdoor use and reduce the risk of electric shock.

Minimum Gage for Cord Sets

Volts

 

Total Length of Cord in Feet

 

120V

 

0-25

26-50

51-100

101-150

240V

 

0-50

51-100

101-200

201-300

Ampere Rating

AWG

 

 

More

Not more

 

 

Than

Than

 

 

 

 

 

 

 

 

 

 

0 -

6

18

16

16

14

6 -

10

18

16

14

12

10-

12

16

16

14

12

12-

16

14

12

Not Recommended

PERSONAL SAFETY

•Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury,

•Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. Air vents cover moving parts and should be avoided.

•Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents.

•Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

•Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

•Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

TOOL USE AND CARE

•Use clamps or other practical way to secure and support the workpiece

2

Page 1 Page 3
Page 2
Image 2
Black & Decker QP1020LK General Safety Rules, Work Area, Electrical Safety, Personal Safety, Tool USE and Care
Page 1 Page 3

QP1020LK specifications

The Black & Decker QP1020LK is a versatile and innovative tool designed to meet the demands of both DIY enthusiasts and professionals alike. This powerful oscillating multi-tool is known for its efficiency and user-friendly features, making it an essential addition to any toolkit.

One of the standout features of the QP1020LK is its powerful 2.0 amp motor, which provides ample power for a variety of applications. Whether you're sanding, scraping, or cutting through different materials, this tool delivers consistent performance. The variable speed settings allow users to adjust the tool's speed from 10,000 to 22,000 oscillations per minute, ensuring optimal results for various tasks.

The QP1020LK uses a tool-free accessory change system. This means switching attachments is quick and easy, reducing downtime and increasing productivity. The inclusive 20-piece accessory kit offers a wide range of blades and pads designed for cutting wood, drywall, and metal, as well as sanding and scraping applications. This versatility ensures that users have the right tools for their specific projects at hand.

Another important aspect of the Black & Decker QP1020LK is its ergonomic design. The tool features a comfortable grip that enhances maneuverability and reduces fatigue over extended periods of use. Additionally, the compact design allows for easy access to tight spaces, making it ideal for intricate jobs where larger tools would be cumbersome.

The QP1020LK also incorporates innovative cooling technology, which allows the tool to operate efficiently without overheating. This is especially important during arduous tasks, as it contributes to the longevity and durability of the tool.

Safety is always a priority, and the Black & Decker QP1020LK is designed with user protection in mind. Its integrated safety features prevent accidental starts, ensuring users can work confidently.

In summary, the Black & Decker QP1020LK is a standout oscillating multi-tool characterized by its powerful motor, variable speed settings, tool-free accessory changes, and ergonomic design. With a comprehensive accessory kit and enhanced safety features, this tool is well-equipped to handle a wide array of projects, making it a must-have for anyone looking to enhance their DIY capabilities. Whether you are a novice or a seasoned professional, the QP1020LK offers the reliability and performance needed to tackle jobs of any scale.
Top Page Image Contents