Operating Instructions, Switch | Black & Decker QP1020LK specs

633145-02,01 QP1020LK 12/16/05 1:20 PM Page 8

BEVEL ANGLE ADJUSTMENT

Adjust bevel angle (figure 7) using bevel adjustment knob and bevel scale. Tighten knob securely.

Bevel adjustment knob

ATTACHING AND REMOVING THE BLADE

NOTE: The first time the blade bolt is removed from saw without a blade installed, it may be necessary to place the blade wrench on the bolt head and tap it sharply in the counter clockwise direction.

Retract lower guard and assemble blade and clamp washer as shown (Fig. 8).

	8
		Direction of teeth
	Outer clamp	Inner
	washer	Inner
	washer	clamp
		clamp
		washer
	Blade clamping screw	Saw
		Saw
	Blade	spindle

Insure large surface of washer is toward blade. Use spindle lock to prevent spindle rotation as shown in figure 9. Tighten blade securely. Never engage spindle lock while blade is turning.

9	Spindle lock
	Dispositif de

verrouillage de

l’arbre

Seguro de la

flecha

OPERATING INSTRUCTIONS

WARNING: To reduce the risk of serious personal injury, read, understand and follow all important safety warnings and instructions prior to using tool.

GENERAL CUTS (IMPORTANT: READ SAFETY WARNINGS AND INSTRUCTIONS. )

GUARD AGAINST KICKBACK

With unit unplugged, follow all assembly, adjustment and set up instructions. Make sure lower guard operates. Select the proper blade for the material to be cut.

•Measure and mark work for cutting.

•Support and secure work properly (See Safety Rules and Instructions).

•Use appropriate and required safety equipment (See Safety Rules).

•Secure and maintain work area (See Safety Rules).

•With plug inserted and guard closed, make sure switch turns saw on and off.

WARNING: It is important to support the work properly and to hold the saw firmly to prevent loss of control which could cause personal injury. Figure 3 illustrates recommended hand position.

SWITCH

To operate the tool, depress the trigger switch shown in figure 10. The tool will continue to run as long as the trigger is depressed.

To turn the tool off, release the trigger switch. There is no provision for locking the tool on, and the switch should never be locked on by any other means.

10	Trigger
	Switch

KERF PLATE ADJUSTMENT

•Be sure the saw is unplugged.

•Install laser module and actuate to verify laser edge aligns with the kerf indicator edge. (This is a factory setting.)

•If this setting is aligned the saw is ready for use.

•If the alignment has been affected during use or the saw blade has been changed please perform the following process.

QP1020LK specifications

The Black & Decker QP1020LK is a versatile and innovative tool designed to meet the demands of both DIY enthusiasts and professionals alike. This powerful oscillating multi-tool is known for its efficiency and user-friendly features, making it an essential addition to any toolkit.

One of the standout features of the QP1020LK is its powerful 2.0 amp motor, which provides ample power for a variety of applications. Whether you're sanding, scraping, or cutting through different materials, this tool delivers consistent performance. The variable speed settings allow users to adjust the tool's speed from 10,000 to 22,000 oscillations per minute, ensuring optimal results for various tasks.

The QP1020LK uses a tool-free accessory change system. This means switching attachments is quick and easy, reducing downtime and increasing productivity. The inclusive 20-piece accessory kit offers a wide range of blades and pads designed for cutting wood, drywall, and metal, as well as sanding and scraping applications. This versatility ensures that users have the right tools for their specific projects at hand.

Another important aspect of the Black & Decker QP1020LK is its ergonomic design. The tool features a comfortable grip that enhances maneuverability and reduces fatigue over extended periods of use. Additionally, the compact design allows for easy access to tight spaces, making it ideal for intricate jobs where larger tools would be cumbersome.

The QP1020LK also incorporates innovative cooling technology, which allows the tool to operate efficiently without overheating. This is especially important during arduous tasks, as it contributes to the longevity and durability of the tool.

Safety is always a priority, and the Black & Decker QP1020LK is designed with user protection in mind. Its integrated safety features prevent accidental starts, ensuring users can work confidently.

In summary, the Black & Decker QP1020LK is a standout oscillating multi-tool characterized by its powerful motor, variable speed settings, tool-free accessory changes, and ergonomic design. With a comprehensive accessory kit and enhanced safety features, this tool is well-equipped to handle a wide array of projects, making it a must-have for anyone looking to enhance their DIY capabilities. Whether you are a novice or a seasoned professional, the QP1020LK offers the reliability and performance needed to tackle jobs of any scale.

Black & Decker QP1020LK instruction manual Operating Instructions, Bevel Angle Adjustment, Switch

Models: QP1020LK