2.Fully assemble the chopper.
3.Connect it to the electricity supply.
4.Turn the on/off knob (12) to the on ‘I’ position to start the appliance.
5.Remove the pusher(1).
6.Feed the ingredients down the feeding tube (2).
7.The pusher (1) can be used to guide smaller ingredients onto the blade.
8.When finished, turn the on/off knob (12) to the off ‘0’ position to stop the appliance.
The appliance should be disconnected from the mains supply before removing the blade holder.
The appliance will not operate without the bowl lid fitted.
Do not operate the appliance without the blade fitted.
The chopper should not be run for longer than 2 minutes. After a continuous run of 2 minutes, the chopper should be allowed to cool for at least 5 minutes before further use.
Useful advice
•Place the appliance on a clean, flat work surface.
•When chopping is complete disconnect the appliance from the power socket.
ENGLISH
Maintenance & cleaning
•Switch the appliance off, remove the plug from the power socket and wait until the blade has stopped rotating.
•The appliance is easier to clean if you do so immediately after use.
•Do not use abrasive cleaning agents, scourers, acetone, alcohol etc. to clean the appliance.
•All removable parts can be cleaned in a dishwasher.
•All removable parts can be cleaned with a cleaning brush in warm water with some
•Remove the dirty parts from the motor unit.
•Clean the motor unit with a damp cloth.
Warning! Never immerse the motor unit in water nor rinse it under the tap.
Technical data
| SM250 |
Voltage | 220 – 240 Volts |
Supply | 50/60 Hz |
|
|
Power consumption | 200 W |
|
|
Net Weight | 1.4 Kg |
|
|
7
