ENGLISH
•Set the steam control (7) to the no steam position.
•Hold the appliance at an angle.
•Fill the appliance with water using the beaker provided.
Warning! Never fill above the maximum filling level indicted on the beaker provided. Normal tap water can be used, but if you live in a hard water area the use of distilled water is recommended. Do not use chemically
Filling the spray water tank
In order to be able to use the spray feature, you will first need to fill the spray water tank with water.
•Make sure that the appliance is unplugged.
•Open the spray water tank cover (4).
•Hold the appliance at an angle.
•Fill the appliance with water using the beaker provided.
•Close the spray water tank cover (4).
Warning! Never fill above the maximum filling level indicted on the beaker provided. Normal tap water can be used, but if you live in a hard water area the use of distilled water is recommended.
Do not use chemically
Use
Warning! Do not leave the appliance unattended while it is connected to the power supply and during the cool down period.
Temperature setting
The required temperature setting depends on the garment fabric.
•Adjust the temperature control dial (8) to the required setting:
-• Synthetics
-•• Silk/wool
-••• Cotton/Linen
If you are unsure of the fiber content of a garment: start with a low temperature setting and test on a small area (seam or inside hem). If wrinkles remain, gradually increase the heat setting until you find the optimum setting.
Using as a dry iron
•Stand the appliance on its heel rest (12).
•Plug the appliance in and switch on.
•Set the steam control (7) to the no steam position.
•Adjust the temperature control dial (8) to the required setting.
The heating light (10) will switch off when the appliance has reached the required temperature.
Using as a steam iron
•Fill the water steam tank as described above.
•Stand the appliance on its heel rest (12).
•Adjust the temperature control dial (8) to the required steam setting.
The heating light (10) will switch on. When the heating light switches off, the iron will be ready for use as a steam iron.
The heating light will regularly switch on and off whilst ironing.
•To create steam, set the steam control (7) to the steam position.
•Plug the appliance in and switch on.
Using the spray button
The spray feature can be used at any temperature setting when either steam or dry ironing.
•Make sure that there is water in the spray water tank.
•Press the spray button (2) several times to activate the pump while you are ironing.
6
