Black & Decker manual VG085 Cradle for Sony PSP, Cradle Attachment, Safety Precautions

VG085

Cradle for Sony PSP

VG085

(A)

(B)

Cradle Attachment

Step 1. Attach the PSP cradle to the dual-T tab head (A) by inserting the T-tabs into the T-slots (B).

(D)

(C)

Sony PSP Cradle Instructions

Step 1. Insert PSP into the cradle at a slant so that the base of the PSP comes to rest on the spring loaded support legs (C).

Step 2. While firmly holding the cradle, push downward on the PSP so that the spring loaded support legs slide down. This allows enough clearance for the top of the PSP to slide under the top support clip (D).

Step 3. To remove PSP from cradle follow step 2

Safety Precautions

Do not install Arkon products over an air bag cover or within the air bag deployment zone. Arkon Resources, Inc. assumes no responsi- bility of liability for injury or death as a result of car crashes and/or air bag deployment.

Arkon Resources, Inc. is not responsible for any damages caused to your car, your device, or yourself due to the installation or use of the pedestal mount.

		TM
	The Mobile Mounting Specialists
Consumer Hotline:		www.arkon.com
(USA)	(800) 841-0884	Arcadia, CA 91006 USA
(INT'L)	(626) 254-9005	Made in Taiwan
	Mon-Fri. 9am-5pm, PST	© Copyright 2007 Arkon Resources, Inc.

PSP is a trademark of Sony Computer Entertainment Inc. Arkon Resources, Inc. is not affiliated with Sony Computer Entertainment Inc.