90521888 VPX3101 1VPX Inverter 7/31/07

10:15 AM Page 11

Note: Ensure wattage of all equipment simultaneously plugged into the VPX does not exceed 8 watts continuous.

120 VOLT AC OUTLET

1.Install a fully charged VPX battery pack into the VPX power source. Turn the VPX power source to the ON position. Status LED Indicator will be lit solid, indicating proper operation of the VPX power source.

2.Plug the (110/120 volt AC) appliance into the AC outlet of the VPX power source and operate normally (Figure F).

Note: The VPX power source will not operate appliances and equipment that generate heat, such as hair dryers, electric blankets, microwave ovens and toasters.

USB POWER PORT

1.Install a fully charged VPX battery pack into the VPX power source. Turn the VPX power source to the ON position. Status LED Indicator will be lit solid, indicating proper operation of the VPX power source.

2.Plug the USB-powered device into the VPX power source’s USB Power Port and operate normally (Figure G).

Note: The VPX power source’s USB Power Port does not support data communication. It only provides 5 volts/350mA DC power to an external USB- powered device.

RATED VERSUS ACTUAL CURRENT DRAW OF EQUIPMENT

Most electrical tools, appliances, electronic devices and audio/visual equipment have labels that indicate the power consumption in amps or watts. Be sure that the power consumption of the item to be operated is below 8 watts. If the power consumption is rated in amps AC, simply multiply by the AC volts (115) to determine the power.

Resistive loads are the easiest for the VPX power source to run; however, it will not run larger resistive loads (such as electric stoves and heaters), which require far more wattage than the VPX power source can deliver. Inductive loads (such as TVs and stereos) require more current to operate than do resistive loads of the same wattage rating.

For safety reasons, the VPX power source will simply shut down if it is overloaded. To restart the VPX power source, 1) remove the load then 2) turn the VPX power source OFF then back ON. Then plug devices back into the VPX power source making certain that the total load does not exceed 8 watts continuous.

PROTECTIVE FEATURES

The VPX power source monitors the following conditions:

Low Battery Voltage – this condition is not harmful to the VPX power source but could damage the VPX battery, so the VPX power source automatically shuts down when the VPX battery becomes low of charge. This will be indicated by a slow flashing red LED in the front panel before automatic shutdown of VPX power source.

Thermal Shutdown Protection – the VPX power source will automatically shut down when the VPX power source becomes overheated. This will be indicated by rapid flashing red LED. Immediately unplug the device or devices from the VPX power source. Manual reset achieved by turning the VPX power source OFF then back ON will be necessary after the VPX power source cools down to restart VPX power source.

Overload/Short Circuit Protection – the VPX power source will automatically shut down when an overload or short circuit occurs. This will be indicated by rapid flashing red LED. Immediately unplug the device or devices from the VPX power source. Manual reset achieved by turning the VPX power source OFF then back ON will be necessary to restart VPX power source.

OPERATING TIPS

The VPX power source should only be operated in locations that are:

DRY – Do not allow water or other liquids to come into contact with the VPX power source .

11

Page 10 Page 12
Page 11
Image 11
Black & Decker 90521888 Operating Tips, Volt AC Outlet, USB Power Port, Rated Versus Actual Current Draw of Equipment
Page 10 Page 12

90521888, VPX3101 specifications

The Black & Decker VPX3101,90521888 is a versatile and innovative power tool designed to meet the needs of both professional contractors and DIY enthusiasts. This powerful cordless tool offers a range of features and technologies that set it apart from the competition, making it an essential addition to any tool collection.

One of the standout features of the VPX3101 is its advanced lithium-ion battery technology. This battery provides consistent power, ensuring that users can complete their tasks without interruptions. The lightweight design of the VPX3101 makes it easy to handle, reducing user fatigue during extended use. With quick charging capabilities, the battery can be replenished with minimal downtime, allowing users to stay productive.

The VPX3101 is equipped with a high-performance motor that delivers exceptional torque and speed, making it suitable for a wide variety of applications. Whether you are drilling into tough materials or driving screws with precision, this tool provides the power you need to tackle any job. The variable speed control gives users the flexibility to adjust the tool’s performance to match the specific task at hand, enhancing accuracy and efficiency.

One of the key technologies incorporated in the VPX3101 is its ergonomic design. The handle is designed for maximum comfort and grip, ensuring that users can maintain control even in challenging conditions. Additionally, the tool is equipped with an integrated LED work light, illuminating the workspace and providing visibility in low-light conditions. This is particularly beneficial for tasks in cramped or dimly lit areas, enhancing safety and precision.

Another notable feature of the Black & Decker VPX3101 is its compact design, which allows for easy maneuverability in tight spaces. This makes it an excellent choice for tasks such as furniture assembly, cabinetry work, and other home improvement projects where space is limited. The tool also features a quick-release chuck, allowing for fast and easy bit changes, which helps to streamline workflow.

Durability is a defining characteristic of the VPX3101. Constructed with high-quality materials, this tool is designed to withstand the rigors of daily use. Whether used on a job site or at home, users can trust that the VPX3101 will deliver reliable performance over time.

In summary, the Black & Decker VPX3101,90521888 is a powerful, user-friendly cordless tool that combines advanced technology with practical features. Its ergonomic design, exceptional battery life, and high-performance capabilities make it a top choice for both professionals and DIYers looking to tackle a variety of tasks with confidence and ease.
Top Page Image Contents