ENGLISH
Using as a dry iron
•Stand the appliance on its heel rest (12).
•Plug the appliance in and switch on.
•Set the steam control (5) to the no steam position.
•Adjust the temperature control dial (9) to the required setting.
The heating light (10) will switch off when the appliance has reached the required temperature.
Using as a steam iron
•Fill the water steam tank as described above.
•Stand the appliance on its heel rest (12).
•Adjust the temperature control dial (9) to the required steam setting.
The heating light (10) will switch on. When the heating light switches off, the iron will be ready for use as a steam iron.
The heating light will regularly switch on and off whilst ironing.
•To create steam, set the steam control (5) to the required steam position.
= Low steam
= High steam
•Plug the appliance in and switch on.
Using the steam burst button
The steam burst feature can only be used whilst ironing on a high temperature setting.
•Make sure that there is water in the tank and the temperature control dial (9) is set to the high steam position.
•Lift the appliance and press the steam burst button (6). You may need to press a few times to activate the pump.
Using the spray button
The spray feature can be used at any temperature setting when either steam or dry ironing.
•Make sure that there is water in the water tank.
•Press the spray button (2) several times to activate the pump while you are ironing.
Cleaning and maintenance
Before cleaning and maintenance, remove the plug from the socket and allow the appliance to cool.
Self Clean
The
•Fill the tank to the maximum filling level.
•Set the temperature control dial (9) to the max position.
•Plug the appliance in and switch on.
•Allow the appliance to heat up until the heating light (10) switches off and then on again.
•Unplug the appliance and hold it horizontally over the sink.
•Press the
Warning! Hot water and steam will come out of the vents. Impurities and scale will be washed away.
6
