![» Use fiber ports to extend your network up to](/images/new-backgrounds/104770/1047703x1.webp)
Features
» Use fiber ports to extend your network up to |
100 kilometers (62.1 miles). |
Double the distance of your copper links.
PowerDsine™ 6500 Series
PoE Midspan Power Injector
(LPB201A)
» Receive power from a PoE PSE device. |
» Use copper ports to increase network port |
density. |
» |
and receive on a single fiber, enabling you to |
maximize use of your fiber infrastructure. |
» All copper ports are autosensing |
Mbps Ethernet with |
» Port #2 supports |
» DiffServ/TOS IP packet prioritization |
on all ports for QoS prioritization. |
» Fiber ports provide notification of link loss at |
the far end of the fiber. |
» Include broadcast storm protection. |
» Support |
PoE PD Switch
(LPD100A)
100 meters
CAT5e cable carrying
data plus power
VoIP phone | PCs |
UPS
PoE PD Switch
(LPD106A)
100meters
CAT5e cable carrying
data plus power
VoIP phone | PCs |
100meters
CAT5e cable carrying
data only
100 meters
CAT5e cable carrying
data plus power
fiber optic
cable
To other campus building
VoIP phone | PC |
PoE PD Switch
(LPD106A)
fiber optic
cable
To other campus building
OVERVIEW
PoE PD Switches are perfect for your network’s edge. Unlike most Power over Ethernet (PoE) switches, which are power sourcing equip- ment (PSEs) that provide power to PoE devices, these switches are powered devices (PDs) and receive their power from a PSE. These switches are an easy way to extend the range of your Ethernet network and increase port density.
Powered by Ethernet
PoE PD Switches receive their power from any PoE PSE device across CAT5 or higher UTP cable. Because they’re powered by the same cable that provides their Ethernet connection, installation is simplified and you don’t need to worry about having power outlets at remote locations, saving you installation costs.
A wide range of port options
These nimble switches are available with copper ports only or with copper ports plus a fiber uplink. There is even a model with an SFP port that enables you to use SFPs for greater flexibility on the fiber link. One copper port on each switch supports PoE.
Use models with fiber ports to add
One port on each switch is for
A full-featured switch
PoE PD Switches provide the features you’re looking for. All copper ports are
Broadcast storm protection (message rate filtering) prevents net- work downtime by shutting down ports if broadcast or multicast traffic exceeds its threshold.
DiffServ on all ports provides quality of service (QoS) prioritization so crucial network traffic gets through first.
Link Loss on all fiber ports notifies you if the fiber link fails.
4/16/2010 |
| |
#26592 | ||
|
blackbox.com | 2 of 3 |