Black Box Ethernet NIC, LH1350C-ST-R3 Cable Specifications, Technical Specifications, Fiber cable

LH1350C Serial Fast Ethernet NICs

Cable Specifications

Fiber cable

Bit error rate:	<10-9
Single mode fiber (recommended):	9 µm
Multimode fiber (recommended):	62.5/125 µm
Multimode fiber (optional):	100/140, 85/140, 50/125 µm
LH1350C-ST-R3, LH1350C-SC-R3 1300 nm multimode
Fiber optic transmitter power:	min: -19.0 dBm	max: -14.0 dBm
Fiber optic receiver sensitivity:	min: -31.0 dBm	max: -17.0 dBm
Link budget:	12.0 dBThe fiber optic transmitters

The fiber-optic transmitters on the device meet Class I Laser safety requirements per IEC-825/CDRH standard and compy with 21CRF1040.10 and 21CRF1040.11.

Technical Specifications

For models LH1350C-ST-R3, LH1350C-SC-R3

Standards:	IEEE 802.3
Expansion bus standard:	PCI 2.1, 2.2
Data rate	100Mbps fiber media
LED:	LINK/ACT (on the bracket)
	ON = communication link; FLASHING = activity
	on link
	FDX (full duplex link); ON = full duplex link
Drivers:	• NetWare Server 3.12, 4.x, 5.x; 6.x
	• Netware DOS Client ODI
	• Windows 95, 98, 2000, 2003, NT4.0, XP
	• Linux
Boot server support:	Novell RPL Boot ROM; PXE Boot ROM
Dimensions:	3.2”W x 5.4”D x 0.9”H (80 mm x 138 mm x 23
	mm)
Weight:	3 oz. (91g) approximate
Power consumption:	1.0A @ +5VDC
MTBF	184,743 hours (Bellcore7 V5.0)
Opearting temp:	0°C to 50°C (32°F to 122°F)
Storage temp:	-25°C to 85°C (-13°C to 185°F)
Humidity:	5% to 90%, non-condensing
Altitude:	0 to 10,000 feet
Warranty:	Lifetime

WARNING: Visible and invisible laser radiation when open: DO NOT stare into the beam or view directly with optical instruments. Failure to observe this warning could result in damage to your vision or blindness.

CAUTION: Use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation exposure.

The information in this manual is subject to change without further notice.

4 24-hour Technical Support: 1-724-746-5500 24-hour Technical Support: 1-724-746-5500 5