LH1350C Serial Fast Ethernet NICs
Troubleshooting
Diagnostics LEDs and Boot ROM
LEDS
The LINK/ACT LED lights when a fiber cable or twisted pair cable connection is good. It blinks to indicate activity.
The collision and
Boot ROM
To add the remote boot feature to a workstation, insert the Boot ROM into the ROM socket. See Figure 1 on page 2.
After power UP, the LINK/ACT LED should light; if not, check the following:
1Confirm that the LH1350C module is properly inserted into the master slot.
2Confirm that the PC is properly connected to a power source and with the power source turned ON.
3Check the fiber cable for proper connection.
4Contact Tech Support:
Note: To connect this device to a router, bridge, or switch, please refer to the corresponding technical manual for the device.
|
| Declaration of Conformity |
|
|
|
Name of Mfg: | Black Box Corp,1000 Park Dr., Lawrence, PA 15505 U.S.A. | |
Model: | ||
Part Number: | ||
Regulation: | EMC Directive 89/336/EEC | |
Purpose: | To declare that the | |
| which this declaration refers, is in conformity with the following | |
| standards: | |
CISPR 22:1997+A1:2000; EN 55022:1998+A1:2000 Class A; FCC Part 15 Subpart B; 21CFR subpart J
I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and Standard(s).
| July 5, 2005 |
Stephen Anderson, | Date |
Contact Us
Technical support
Technical support is available at techsupport@transition.com
• US and Canada: |
Ask a question anytime by sending an email: info@blackbox.com.
Address
Black Box Corporation
1000 Park Drive
Lawrence, PA 15055
Telephone:
Fax:724-746-0476
6 |
| 7 |
