Express Ethernet Switch
VLAN and Speed/Duplex port setting for LB9017A-R2
??After setting up the console port, turn on the switch and press any key to view the main menu shown below:
| VLAN Port List |
|
|
|
|
|
| ||
|
|
|
|
|
|
| |||
| V1 | 1,2,3,4,5,6,7,8,9,10,11,12 |
|
|
|
|
| ||
| V2 | <empty> |
|
|
|
|
|
|
|
| V3 | <empty> |
|
|
|
|
|
|
|
| V4 | <empty> |
|
|
|
|
|
|
|
| Port | Mode | Flw | VLAN List | Port | Mode | Flw | VLAN List | |
| 1 | Auto | On | V1 | 7 | Auto | On | V1 |
|
2 | Auto | On | V1 | 8 | Auto | On | V1 | ||
3 | Auto | On | V1 | 9 | Auto | On | V1 | ||
4 | Auto | On | V1 | 10 | Auto | On | V1 | ||
5 | Auto | On | V1 | 11 | Auto | On | V1 | ||
6 | Auto | On | V1 | 12 | Auto | On | V1 | ||
|
|
|
|
|
|
|
|
|
|
Figure 4: Console port displaying default settings
Default Settings:
All ports reside in the V1 group using
Valid Commands:
[V]Configure VLAN groups
[M]Select 10/100Mbps and half or
[D]Restore the default settings [ESC] Abort and return to the menu
[T]Performing port aggregation
Establishing a VLAN
Virtual Local Networks (VLANs) enable segmentation of the LAN without regards to physical location. Configure the ports to reside in up to four VLANs (virtual local area networks). Attaching the console port to a PC or any VT100 compatible unit launches a main menu screen displayed by hitting any key. The Escape key quits the program functions. The [V] command produces a prompt to enter the VLAN number followed by the corresponding port(s). Use commas (,) or dashes
??Enter [V] from the Main Menu
??Select a VLAN group:
??[V1], [V2], [V3], or [V4]
??Enter the port #.
To return to the default settings, enter [D] from the main menu. A prompt appears to verify this action since all functions are reset to default, not just the VLAN function.
Assign each VLAN group individually and continue assigning ports until all of the ports are assigned to at least one VLAN group. Hit the [ESC] key when done. The [ESC] key will not return the screen to the main menu until each port is assigned.
11