Black Box AC1100A manual Appendix A. Cabling Pinouts, Appendix B. Status LED’s, Multi Dvi System

APPENDIX A:Cabling Pinouts

Appendix A. Cabling Pinouts

Table A-3. T568B CAT5 pinout

MULTI DVI SYSTEM.

Appendix B. Status LED’s

The Multi DVI System feature “status-at-a-glance” LED’s to ensure the units are functioning properly and to isolate problems with input signals, units, and/or cabling thus saving time during installation and troubleshooting. Reference the following tables for information on theses indicators. The UTP connector also contains LED indicators on either side to provide visual cues on connection and traffic status.

Link Status LED’s

LED Meaning

1Normal Operation == OFF

ON == EXCEPTION—a serious problem has occurred with the unit. Contact Technical Support.

2Normal Operation == ON

ON == Active DVI signal detected from source for transmitter side OR Active DVI display detected if receiver side

3Normal Operation == ON

Indicates active link between transmitter and receiver

4Normal Operation == ON

Indicates video packet transmission between transmitter and receiver

Multi DVI RJ45 UTP status Indicators:

Left Side LED should blink when data is	Right Side LED should be ON when
sent between transmitter and receiver. If	communication is established between a
no blinking occurs, check DVI signal	transmitter and receiver. If it is off,
input from the video source.	check cabling between the units.

12 9 10 5