Chapter 4: Configuration and Setup
Figure 4-8. Insert the plug end of the wire through the loop.
Keep the loop on top
Figure 4-9. Pull the cable taught to secure the loop.
Step 5. Wrap the remaining length of power cord around the power brick (see Figure 4-11, page 13.
Step 6. Wrap the plug wire around the brick. Leave at least 7" of extra cable if the divider will be inserted into the bottom shelf, or at least 21" of extra cable if the divider will be inserted into the top shelf.
Lower shelf: 7"
Upper shelf: 21"
Figure 4-10. Wrap the remaining electrical cable around the power brick. Leave 7" of extra cable if the divider will be inserted into the bottom shelf, or at least 21" of extra cable if the divider will be inserted into the top shelf.
Page 12 |
| NBC20S |
