112
5/24/2005
12:00

2, 3

1

Using the Self-Timer

In self-timer mode, the picture is taken ten seconds or two seconds after the shutter release button is pressed.

4

1

Taking

2

Pictures

3

 

Press the four-way controller (2) in Capture mode to display g or r on the LCD monitor.

Press the shutter release button halfway.

The focus frame on the LCD monitor will light green when the camera is in focus.

Press the shutter release button fully.

gThe self-timer is engaged and the self-

timer lamp lights for about seven seconds. The picture is taken

approximately three seconds after the self-timer lamp starts to blink.

rThe self-timer is engaged and the picture is taken approximately two seconds after the self-timer lamp starts to blink.

Focusing may be compromised if you move the camera while the self-timer is running.

•The countdown is displayed on the LCD monitor when you press the shutter release button.

•To cancel the self-timer, press the MENU button while the second count is displayed.

Taking Pictures of Yourself 1p.51

Troubleshooting “Subject is not in focus” 1p.157

64