1

Using the Remote Control Unit (optional)

You can switch the Drive mode to Remote Control mode and take pictures using the remote control unit E or F (optional).

Taking Pictures Using the Remote Control

1 Press the four-way controller (2)

112

in Capture mode to display ior h on the LCD monitor.

The self-timer lamp blinks slowly and the camera is ready to take the picture.

5/24/2005

2 Press the shutter release button12:00 on the remote control unit.

iThe self-timer lamp blinks quickly and the picture is taken after approximately three seconds.

h The picture is taken immediately.

Focusing may be compromised if you move the camera while the self-timer lamp is blinking.

4 TakingPictures

65