724-746-5500 | blackbox.com
Page 26 NBS008A
724-746-5500 | blackbox.com
Chapter 6: Ethernet Network Interface Setup
After the system reinitializes, you will again be greeted by the sign-on message as before. You can now attach a 10BASE-T cable
between the Network port on the switch and an available port on your Ethernet hub or switch /router. The switch will now
respond to telnet, SNMP and/or HTTP messages at the assigned IP address, depending on which options you enabled on the
Ethernet Module. Chapter 7 describes the commands that are available via the telnet interface. Chapter 8 describes the operation
of the Web browser interface, and Chapter 9 provides a MIB Path Summary that lists the supported SNMP variables and their
functions.