11
CHAPTER 3: Configuration
3. Configuration
The Converter is configured using two internal
4-position DIP switches. This section shows how to
access the DIP switches, provides an overview of the
factory-default settings, and describes all possible
configuration options. For instructions on how to
configure the Converter for specific applications,
see Section 3.2.
3.1 Accessing the DIPSwitches
The Converter has a main PC board and a daughter-
board. DIP switch S1 is located on the underside of
the main PC board (see Figure 3-1). DIP switch S2
is located on the top of the daughterboard (see
Figure 3-2).