ServSwitch iPATH Manager API Documentation
-d_version (1 = ACR1000A, 2 = ACR1002A)
-d_variant ('', 'b' = ACR1002A)
-d_ip_address
-d_configured (0 = no, 1 = yes)
-d_valid_firmware (0 = no, 1 = yes)
-d_valid_backup_firmware (0 = no, 1 = yes)
-d_firmware (firmware version, e.g. 2.5.17879)
-d_backup_firmware (backup firmware version)
-d_date_added (Date device added to iPATH network e.g.
-count_transmitter_channels (the number of channels containing this transmitter) The following properties are only returned for receivers:
-con_start_time (start time of last connection e.g.
-con_end_time (empty if connection still active, else date/time the connection was ended e.g.
-con_exclusive (0/1 - if the last connection is/was in exclusive mode)
-con_control (0/1 - if the last connection has/had USB enabled)
-u_username (username of the user who initiated the last connection)
-u_id (user ID of the user who initiated the last connection)
-c_name (name of the channel last connected)
-count_receiver_groups (the number of receiver groups this receiver is a part of)
-count_users (the number of users who have access to this receiver)
Examples
Input:
/api/?v=2&method=get_devices&token=xxxxx
/api/?v=2&method=get_devices&device_type=tx&page=2&results_per_page=3&token=xxxxx
Output:
<api_response> <version>2</version>
<page>2</page>
<results_per_page>3</results_per_page> <total_devices>12</total_devices> <count_devices>3</count_devices> <devices>
<device item="4"> <d_id>170</d_id>
<d_mac_address>00:0F:58:01:6E:3D</d_mac_address> <d_name>RX 123</d_name> <d_online>1</d_online>
<d_type>rx</d_type>
<d_version>2</d_version> <d_variant></d_variant> <d_ip_address>10.10.10.66</d_ip_address> <d_description></d_description> <d_location>Server Rack 3</d_location> <d_configured>1</d_configured> <d_valid_firmware>1</d_valid_firmware>
Page 6 |
