4.Fan out the four pairs and line up each pair with the colors on the stuffer cap.
5.Remove the excess center cross filler to the stuffer cap base.
6.Untwist the colored pairs and lace the wires to the colored holes in the stuffer cap.
7.Trim the excess wires down to the sides of the stuffer cap.
8.Open the butterfly doors on the CAT 6A jack body and press the stuffer cap to the contacts on the jack, making sure to match the colors on the stuffer cap to the colors on the jack body.
9.Press hard.
10.Close the CAT 6A jack butterfly doors to help force the wires into the jack body contacts.
11.Wrap the included cable tie around the slot in the back of the CAT 6A jack.
Trademarks Used in this Manual
Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc.
Mylar is a registered trademark of Dupont Teijin Films.
Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
© Copyright 2010. All rights reserved.
FREE! Live, 24/7 Tech Support is just 20 seconds away.
