Black Box Universal Video and Stereo Audio Fiber Optic Transmission System, AC300A-RX, AC300A-TX

AC300A-TX / AC300A-RX

INSTALLATION

Indicator LEDs and Alarm Circuitry:

The AC300A-V/A system has integral indicator LEDs that are used to monitor the state of the units. Transmitter and receiver units each feature one Video LED, one Audio LED and one Power LED. Following is an explanation of each LED’s indicator conditions.

TRANSMITTER and RECEIVER:

Power: (Green) Indicates that correct power has been applied.

TRANSMITTER:

Video: OFF: Indicates no video detected on the Y-Video BNC connector ON: Indicates video detected on input Y-Video BNC connector

Audio: OFF: No audio detected on input audio connector BLINKING: Audio detected on input audio connector

RECEIVER:

Video: OFF: Indicates no video detected over fiber and, as a result, no video present on output Video BNCs.

ON: Indicates video detected over fiber and, as a result, video present on output Video BNCs.

Audio: OFF: Indicates no audio detected over fiber and, as a result, no active audio detected at the receiver unit.

BLINKING: Indicates audio detected over fiber and, as a result, active audio detected at the receiver unit.

10