Black Box AVU4001A, AVU4001-PS manual Connecting Your Wizard Multimedia Extender LP, Page

Chapter 3: Connecting Your Wizard Multimedia Extender LP

3. Connecting Your Wizard Multimedia Extender LP

Local unit:

1.Connect the HD15 VGA video plug to the video card in the host computer.

2.Connect the USB Type A connector to a vacant USB port on the computer. NOTE: The USB connection only provides power for the units.

3.Connect the RJ-45 plug to the video interconnect cable.

Remote unit:

1.Connect the HD15 VGA video plug to the socket on the display screen.

2.Attach the other end of the RJ-45 interconnect cable to RJ-45 socket on the unit.

IMPORTANT NOTES:

1.Screened (FTP) cable is preferred to connect the two units. For cable runs greater than 50 m, low-skew cable may also be required to avoid color fringing efffects within the video image.

2.Do not connect the local unit via CATx cable to anything other than the remote unit.

Page 10 724-746-5500 blackbox.com AVU4001A