17
ACD 9431
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES NEDERLAND
ESPAGÑOL SVENSKA FRANÇAIS

Mono/Stereo Operation

If the lo•m button 5 is pressed longer than
2 secs. but less than 8 secs., the set swit-
ches over to mono and the stereo symbol (h)
goes off.
If the lo•m button 5 is pressed longer than
2 secs. but less than 8 secs., the set swit-
ches over to stereo and das Stereo-Symbol
(h) erscheint wieder im Display.
When the car radio is switched on it is always
in stereo mode.

Memorizing a Station

With each of the preset buttons : you can
memorize one MW, one LW, and two FM
stations. Display 9a,b either indicates the
FM storage level (“FM”) or the Travelstore
level (“T”).
To memorize a station:
Tune in the desired broadcaster (see chapter
Tuning in a Station Automatically/Manual
Tuning) first. Now press one of the preset
buttons : until the radio resumes play (ap-
prox. 2 seconds). The station is now
stored.
Note:
If you tune to an FM station already stored on
the storing levels FM or Travelstore, the
coresponding storing level and the preset
button will flash in the display.

Automatically Storing the Stron-

gest Stations

(Travelstore)
With Travelstore, you have the opportunity to
automatically store the 5 strongest FM stati-
ons of your respective area and have them
sorted according to their signal strength. The
strongest station is then stored on preset
button 1, the second strongest on preset
button 2, etc. This feature is of special use
while travelling.
• Press the FM•T button 3 for at least
two seconds.
The set searches for the strongest FM
stations and memorizes them on the
“T” storage level (Travelstore). Once
the process is finished, the car radio
automatically tunes in to the strongest
station.
If required, it is also possible to manually
store a station on the Travelstore level. If less
than 5 stations can be received, the free
buttons are briefly represented by dashes.

Activating a Stored Station

If required, the memorized stations can be
activated at a keystroke.
• For this, choose the FM or T storage
level and briefly
• press the respective preset button :.
CD Section

Inserting the Disk

With this set you can play the normal stan-
dard CDs without having to use an adapter:
• Switch the set on.
• Insert the CD (label side up) without
applying force.
The disk is automatically pulled into the unit
to reach the playing position. Once it has
been fed in, reproduction starts.

Ejecting the Disk

• To eject the disk, keep the • SRC
button 6 depressed for at least 2 se-
conds.
Never block or support the CD mechanism in
any way, since this would damage the set.

Title Selection/Cueing and Re-

viewing

After the CD has been inserted into the set,
„Cd“ lights up on display 9. The display
indication 9i changes to “T1” (Track 1) after
approx. 5 seconds. You can skip or repeat
titles by using the < > buttons 7.
Cue (Fast forward):
• Keep depressed the right side of the
rocker switch < > 7 for more than than
1 second.