Restart following interruption of power supply

(Code system switched on)

Switch on the set.

“Cod” will appear in the display.

Briefly press preset button 1, “000” will appear in the display.

Enter the code number given in the Blaupunkt car radio passport:

Preset button 1 only allows to choose “0” or “1”. The first “0” will not be dis- played.

Example: the code number is 0521.

-Press preset button 1 until “000” ap- pears in the display.

-Press preset button 2 five times, “500” appears in the display.

-Press preset button 3 twice, “520” appears in the display.

-Press preset button 4 once, “521” appears in the display.

To confirm the code number: Press the upper part of the rocker switch .

Your car radio is now ready for operation.

If three dashes appear again in the display, you have entered a wrong code number.

Now it is essential to enter the correct code after the waiting period has elapsed (Cod in the display).

If the radio is turned off before the waiting period has elapsed, then the waiting period restarts as soon as the radio is turned on again.

Switching the code system off

Turn off the radio.

Simultaneously press preset buttons 1 and 4 and hold them down.

Turn the set on.

“Cod” will appear in the display.

Enter the code number given in the Blaupunkt car radio passport and con- firm: See example “Restart following interruption …”.

The code system is now deactivated.

Amplifier Section

ON/OFF

DEUTSCH

 

To switch on the set:

Turn button 1 clockwise.

ENGLISH

To switch off the set:

Turn button 1 counterclockwise.

 

Bass and Treble Control

FRANÇAIS

Bass Control

 

To adjust the low frequencies:

 

• Press the AUD button 2.

 

 

Display 9 gives you bas plus a num-

ITALIANO

ber between -7 and +7.

 

• Press rocker switch < > 7 on the right

 

to boost the bass frequencies or on the

 

NEDERLAND

left for bass reduction. The number on

 

the display 9 changes between -7 and

 

+7.

 

Treble Control

 

 

SVENSKA

• Press the AUD button 2 until tre and a

To adjust the high frequencies:

 

number between -7 and +7 appears on

 

 

the display.

ESPAGÑOL

• Press rocker switch < > 7 on the right

 

to boost the high frequencies or on the

 

left for treble reduction. The number on

 

 

display 9 changes between -7 and +7.

 

PORTUGUES

 

 

 

15

Page 6
Image 6
Blaupunkt ACD 9431 manual Amplifier Section, Restart following interruption of power supply, Switching the code system off