Theft protection CODE

As a way of protecting your car radio against theft, the system features a four digit code. You have to enter this number every time the unit is disconnected from your vehicle’s electrical power supply.

As a factory default, the code entry re- quest function is deactivated. However, you have the option of activating this function.

The numerical code is printed on the pass card supplied with your unit.

Note:

Never keep your radio’s pass card in your vehicle!

Activating/deactivating the code

In order to activate/deactivate the code request function, proceed as follows:

Press the ON button 3 to switch off the unit.

Press station buttons 1 and 4 < at the same time.

Keep these station buttons pressed

while switching the unit on by pressing the ON button 3.

Keep station buttons 1 and 4 < pressed until “PUNKT” appears in the display.

Release the station buttons.

The code request function is now acti- vated.

Follow the same procedure to deactivate the code request function.

Note:

To prevent unauthorised persons from deactivating the code, you will have to

THEFT PROTECTION

enter the code in order to deactivate the code request function.

Entering the code

DEUTSCH

Switch on the unit.

 

“CODE” appears in the display first of

ENGLISH

Keep pressing station button 1 <

all and is followed by four zeros.

 

until the first number of your code

 

 

appears in the display.

 

 

FRANÇAIS

Keep pressing station button 2 <

 

 

 

 

 

 

until the second number of your

 

 

 

code appears in the display.

 

 

 

Keep pressing station button 3 <

 

 

 

 

ITALIANO

until the third number of your code

 

 

 

 

 

 

appears in the display.

 

 

 

Keep pressing station button 4 <

 

 

 

 

 

until the fourth number of your

 

 

NEDERLANDS

code appears in the display.

 

 

 

 

 

 

Once the correct code is displayed,

 

 

 

press the

 

 

 

or

 

button :.

 

 

 

 

 

 

 

 

 

Note:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SVENSKA

If the code is entered three times incor-

 

 

 

 

 

 

rectly, you will have to wait for a fixed

 

 

 

time period. “WAIT 1 H” appears in the

 

 

display. The unit must remain switched

 

 

 

 

 

 

on during this hour.

 

 

ESPAÑOL

Code LED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

In order to indicate that the unit is theft

 

 

 

protected, you can set the ON button

 

 

 

 

 

PORTUGUÊS

Keep pressing the MENU button

 

3 to flash whilst the unit is switched

 

 

off.

 

 

 

 

 

 

 

 

 

 

; until “LED” appears in the

 

 

 

 

display.

 

 

 

 

 

 

 

 

 

 

Press the

 

 

 

button : to turn the

 

LED on (ON) or off (OFF).

Press the MENU button ;.

17

Page 7
Image 7
Blaupunkt C30 operating instructions Theft Protection, Theft protection Code, Entering the code, Code LED