CASSETTE MODE
Resetting the tape counter
The tape counter is automatically reset when the cassette is changed.
Fast tape winding
➮Briefly press the joystick 7 to the right.
“FORWARD” appears in the display.
➮Briefly press the joystick 7 to the left.
Dolby* B noise suppression
If you play cassettes that were record- ed using the Dolby B process, you should switch on the Dolby feature.
➮Press the softkey 4 assigned to the “DLBY” display item.
“DLBY ON” or “DLBY OFF” appears briefly in the display.
*Noise suppression system manufactured under license from Dolby Laboratories. The word “Dolby” and the
“REWIND” appears in the display.
Stopping fast tape winding
To stop fast tape winding,
➮briefly press the joystick 7 in the opposite direction.
Skipping blank spaces (blankskip)
You can make the unit automatically skip blank spaces on the tape that are longer than ten seconds. To do so, the blankskip feature must be activated.
Switching blankskip on/off
➮Press the softkey 4 assigned to the “BLS” display item.
Traffic information in cassette mode
The “TA” function (traffic announcement priority) means that your device is ready to receive traffic messages even whilst a cassette is being played. If a traffic message is received, cassette playback is stopped and the traffic message is played. For further details, read the chapter entitled “Traffic information”.
The current setting “BLS ON” or “BLS OFF” appears briefly in the display when switching on/off.
80
